Jump to content
SAU Community

Recommended Posts

Well i've been told to make a build thread by damo (djrift)

I've been club racing my R32 GT-R for the past 3 years, and got it to the point where the car was too fast for club racing. It's a neat road car, so I didn't want to buture it with a cage and what not, and more to the point I don't have wads of cash to throw at it.

So after talking to some people before Targa I decided to get a gtst to race in the Tas Super Series. Then I cracked the shits after Targa (for more reasons than the crashes, but I won't go into that), and decided to build it in line with the Targa rules, with the plan to set the car up, and learn it in the Tas Super Series next year, and enter Targa in 2011.

I was lucky enough to find a car locally with no engine and gearbox, the chassis rails are straight as, and the only rust was under the rear pods. The guy was going to build it into a race car, but decided after pulling it into 1000 peices that he wanted to get rid of it. So a few weeks ago Dad, Damo and I went and picked the car up. We filled my car, Dads car, and the skyline with the parts. Damo said he was keen to help, so we'll be spending the next 6 months building it

Got the car to Dad's and put it in his back yard, while he cleared a hole in the garrage. While he did that i got a cheap GT-R bonnet, front bar, boot, and rear wing. And sold the gtst bonnt off.

gallery_5985_3354_1746306.jpg

gallery_5985_3354_59952.jpg

gallery_5985_3354_671262.jpg

awaiting a dirty cheap rb20

gallery_5985_3354_1563639.jpg

GT-R bonnet on.

gallery_5985_3354_2244003.jpg

Horay...finally in the garage on the hoist

gallery_5985_3354_382212.jpg

still full of crap

gallery_5985_3354_1319223.jpg

wheel has seen better days

gallery_5985_3354_291548.jpg

gallery_5985_3354_1328825.jpg

previous owner has removed a lard chunk of the tar :P

gallery_5985_3354_1765405.jpg

gallery_5985_3354_1740519.jpg

gallery_5985_3354_538577.jpg

still left me with some to clean up.

gallery_5985_3354_1283878.jpg

gallery_5985_3354_639008.jpg

ta da

gallery_5985_3354_129475.jpg

gallery_5985_3354_403975.jpg

removing the wiring loom

gallery_5985_3354_939179.jpg

gallery_5985_3354_1477865.jpg

full loom out, and ready to be chopped up.

gallery_5985_3354_932118.jpg

more sound deadener, this weighed 5.5kg....and hid more tar

gallery_5985_3354_258914.jpg

fan, heater, ac, and pedels removed to get the deadener out.

gallery_5985_3354_822287.jpg

horay...more tar

gallery_5985_3354_763384.jpg

passengers side done :) just the center and drivers side to go.

gallery_5985_3354_1875591.jpg

i'm planning to get a bond weld-in kit now.

Edited by sav man
Link to comment
https://www.sau.com.au/forums/topic/278029-bens-r32-gtst-build/
Share on other sites

Hoorar the ball is rolling as we all know you cant actually build a race car without a build thread. they just never get finished other wise.

i think you forgot to thank damo for being such a grate bloke. then for finding a Grate Gtst for you and also letting you work on his Gtst to show you how much more fun they are to work on than GTRs.

many fun times will be soon had on this car and hopefully ben will keep the pics flowing.

Benny, let me know if you want my fully hectic Apexi N1 coil overs for the circuit.

Otherwise, I too am interested to know what you're thinking susp wise? Interested in joining me in a bulk buy (well, two of us :down:) of some Murray Coote stuff?

The minimum wieght for Targa is about 1180kg from memory (factory -10%). So I'm planning to get as close to that as I can, so i'm cutting away everything i can, unfortinatuly my car is a 1992 model, and has the side intrusion, so i'm working how to cut that out. I'm likeing the look of some Buddy Club P1 QF wheels, as they are light as. GT-R lighter bits here and there, there are a few rusting GT-R's being wrecked in tassie ATM, and alloy dosn't rust :down:

Suspention will probably consist of GT-R sway bars. I'm planning to put pretty good shocks in the car, tossing up between, Bilsein PSS9's, Penske 8300's, and MCA's at this stage. I've run revalved Bilsteins in the GT-R for the pas 3 years. But the setup is a compremise between wet and dry, the shocks can handle a varity of spring rates. But you can really change springs between stages if it starts to rain. Drummonds don't seem to be that durable, I've spoken to a few people this year that have had seizing, and over heating problems with them. I'm not in a hurry to spen money there, going to do lots of research before I hand my money over.

Since I live 20mins from Symmons, and it only cost me $65 to get on thetrack whenever I want, i'll be able to spent time to learn how to tune the shocks.

Running gear will be stock, with a clutch upgrade, and maybe a GT-R diff center.

The cage will be pretty extensive as it's going to tarmac rally. High and crossed over side intrusion bars. I'd like to extend the cage to the front towers, been looking at Duncans cage to work that out. Not sure what i'm going to do in the rear with the cage yet.

If the Bens end up going Proflex, keep me in the loop. Good things come in threes :)

1180kg? Once i know how much my car owes me body wise i am keen to keep saving and get a carbon tailshaft and PPG gearset. Probably get better value out of that rather then upgrading suspension to Proflex from what i am currently running

If you have a few dollars for an RB20 PM me as i have come up with a pretty good RB20 combo that i am also keen to try when i get back to Aus :P It will be perfect for what you guys are doing.

will be very interested in this build as well :(

my 32 is slowly coming along atm... not going to rip as much weight out as you but looking at having around 260rwkw so that might help me along a bit!!!

do both front and rear r32 gtr swaybars fit?!? i was considering whitelines (i know cusco are lighter and stiffer but im a jew)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...