Jump to content
SAU Community

Recommended Posts

I had a damaged wastegate line, which gave the engine some being boost spikes (went off the scale of the map sensor) on Friday, and the overheating problems started and got worse from there.

It's a tomie super grommet, but I won't be using that again as they warp the deck of the block

  • 3 months later...

Been a while since an update. The engine is stripped down and I got a replacement block which is at the machine shop. The old block has had it's day.

I had been noticing a pool a silicone under the car whenever is was parked for a length of time. Turns out one of of the rear subframe bushes was leaking it out. So I've dropped the subframe out to put new bushes in it.

97111D63-D5EF-47E5-8FA5-F0C6E9458D8F_zps

2DDE1BD3-08F7-4B22-B512-B3528A60FAFE_zps

C9732C32-C72A-4679-A713-1136B1D53959_zps

  • 2 weeks later...

Subframe is all good. Must be the protective oil coating that it got in the early years.

Block will be back from the machine shop by the end of the week, so I will be able to start assembling that on the weekend.

I am ditching the Nissan optical CAS and going to a High Octane trigger kit. The RPM trace is pretty rough and wouldn't of been helping with reliability.

I did look into that option. But from a reliability point of view, the 20+ year old Nissan optical sensor is still used and likely to fail.

For a road car I'd run the replacement CAS disk.

  • 1 year later...

It’s been a while, but it’s time for an update. 

I entered the Sports GT support race for the V8 Supercars at Phillip Island for Nov 2015 

I installed new sealing rings instead of a head gasket. They require the block to machined similar to o ringing, they are able to grow and follow the head and have a copper gasket with 3bond for the water galleries. 

 

20161021_083820053_iOS_zpslwsn7qyr.jpg 

 

20151024_040357745_iOS_zpsdphuqtap.jpg 

 

I also started building a new winged sump 

 

20151031_071405799_iOS_zpsfladqanm.jpg 

 

2 weeks before I was due to leave for Phillip Island Dad was diagnosed with pancreatic cancer and went in to hospital.  So I parked the new sump and continued to put the car together.  The car was ready a couple of days before I was due to leave, or so I thought.  I got the car tuned and found my Chinese 1zzfe coils were good for 1 dyno pull before dying, so I ran down the road and got some VDO ones (which are still fine) finished the tune and took the car home to find oil under the car. 

I cracked the oil filter mount that bolts to the block  as the gasket was damaged and not giving an even surface.  The crack was almost invisible to the eye, but it was opening up under pressure. 

The day I was due to leave, the doctor called us in and said Dad only had days left to live and advised me not to go, but Dad insisted that I go.  My mate got hold of a filter mount at 1pm and dropped it to me, I fitted it and found it didn't leak after 30 secs of running so I drove back to the hospital to have a beer with dad and drove to the boat. 

 

The first session at Phillip Island my rear tierod came loose, giving me 4mm toe in on the drivers side.  As the weekend went on I found the car wash pushing coolant out for the first couple of laps of each race, and the coolant pressure was spiking.  But I continued on and finished the weekend and got some good wheel to wheel racing in. 

 

https://www.youtube.com/watch?v=vL3z9rH06g0

 

https://www.youtube.com/watch?v=UeeVfNx6w3c

 

In hindsight I realised that I hadn't retentioned the head studs, so the head was lifting, but the sealing rings filled the gap once the cylinder temp raised. 

 

I returned home and Dad died 1 week later.  Shortly after the funeral I decided to run Dad's Subie in Targa instead of the Skyline, as the GT4 class is far more prominent.  I also pulled the head of the Skyline to fix it in case I had to fall back on it. 

Once I got the head off, I could see that the cylinders were leaking everywhere and retentioning headstuds is done for a reason.  As it turned out that's all I did on the Skyline for 12 months, it just sat in the corner of the shed feeling sad. 

The Subie took far more work than I thought to convert to the GT4 regs from the Modern regs so it was all very last minute.  I got to the even with high expectations wanting to do well for Dad and it was the first big rally for me and my girlfriend together.  She had done another event 2 months before Targa with another competitor as a warm up, as I didn't have a car ready, but she was different when she came back. 

We started the event well, and lead for 2 days, but I blew 3 tyres because I'd put too much camber on the car (only worked out after the event), had a couple of offs, and as the event went on I was continually having to fetch the mrs out of the other competitors room.  After the after party she stayed the night 'on the couch'.  After some witness statements of her actions/drunken confessions I kicked her out of home for cheating (turns out it was a few over the years...all racers).  After that I didn't look at the cars for a long time and considered selling them and not going racing again. 

 

Late in 2016 I got back into the Skyline.  I found I had valve float on the inlet valves, so I replaced all the inlet valves and put extra spacers under the springs for more preload.  I put all the engine back together again and hit the starter..... 0 compression on any cylinder.  A few days later I pulled the head back off, everything looked fine, so I put it all back together again.  This time it had compression on 3 then 4 then 5 cylinders, but not 6.  I pulled the engine out and the head off again and found a bent valve.  After talking to some people I worked out that the lifters got gunked up, as they were sitting in a box for 12 months.  I replaced the valve and pulled all the lifters apart and cleaned them.  I also completed my new sump and installed that  while the engine was out. 

 

DSC_0035_zpswmzfiije.jpg 

 

So this time when I put it all back together the car started and ran on 6 cylinders.  I've done some road testing and haven't pushed and coolant plus the coolant pressures seem fine.  I've event retentioned the head studs.  So the car is now ready for it's first event in a long time, the Ross Auto Corsa.  After that I will be using it for Circuit and AASA tarmac rallies 

 

Edited by sav man
  • Like 4

I gave the car it's first shakedown on the weekend and the Ross Auto Corsa.  Played with the setup and boost a bit, the below run is at 10psi boost (usually run 20)

17310129_10154403095355036_6254584094565

17158925_10154403095470036_8776063729511

 

Edited by sav man
  • Like 3

Hi Ben,

Can you eleborate a bit more on the issues that you had with the 1zz coils?

I've just bought the 1NZ coil kit for my R32 tarmac rally car, now you have me worried. The coils that I have are Denso coils according to the manufacturing stamps, but as you know these days things are not always as they seem.

Great work on the car with amazing attention to detail, thanks for taking the time to document the build. Are you planning on doing any tarmac stuff in Victoria?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...