Jump to content
SAU Community

Recommended Posts

Tuned up the sr20 yesterday ready for the drags.

21psi pulled 328kw

30psi pulled 385kw

5558 .6 44mm external gate, poncams and forged motor

Theres is more in it but ringing the poor little things neck.

Unfortunately drags got cancelled due to the weather so thats for another day.

951D03DF-9201-43C1-A389-C7261C5C39DF-5007-000001562858FAE1.jpg

Tuned up the sr20 yesterday ready for the drags.

21psi pulled 328kw

30psi pulled 385kw

5558 .6 44mm external gate, poncams and forged motor

Theres is more in it but ringing the poor little things neck.

Unfortunately drags got cancelled due to the weather so thats for another day.

951D03DF-9201-43C1-A389-C7261C5C39DF-5007-000001562858FAE1.jpg

Thats a lot of power for a 2L on 21psi, is that on E85 though? Hey Mick O hurry up already with the nats, I cant wait to slap my one on lol..

Thats a lot of power for a 2L on 21psi, is that on E85 though? Hey Mick O hurry up already with the nats, I cant wait to slap my one on lol..

Yes ethanol. No way would i push 30psi with 98 pootrol

Finally got some numbers but its not done yet,

On the New motor, with the 6262 .84 TS BB CEA.

Run-in tune (super safe) verylow/negative timing, 9-10 psi. 210-220 rwkw.

Turbo is super responsive and perky even with the timing so low, I noticed instantly its very throttle responsive, its very possible my intake setup helps in this regard. But the way it moves the air so quickly I have a good feeling this setup will be pretty decent on the 30/25 with vct!

One noticable characteristic.. the turbo seems very loud. even on low boost. however i am moving from lowmount to high mount during this build, so that might be why i think that.

will be doing real tuning next week if all continues well. Will post numbers as promised when its done. Unfortunently still running hte PFC and Tomei Z32 as no one has purchased the gear yet.

-dale

results yet?

Big boy turbo, wha happened to wanting response lol

Yeah, things got a bit out of hand with the engine build and from what I have seen so far this turbo should still have good enough response yet make massive power. Its either this or the 6266. Will see how we go.

I have a 6466 on an rb28, and i expect in excess of 500awkw. Might be a little bit too extreme on a daily strees sil. Buut, look at PJ's THING, because thats what it is, a freakish THING. It has a monster and still makes powers that are usuable for speeding up the rotation of the earth arouns the axis of the suns, and stuff

I think it will be OK.

There's a 180sx 2.0 VE non VVL, with a 6466 that made 536rwk@34psi with quite reasonable response.

Then there's James NFI's S15 2.3 VE VVL, with a 6262 that made 430rwk@24psi with ballistic response (but yet to have final tune).

With my motor 2.2 VE VVL I figure the next size above from James should still provide enough response yet be able to make 450-500rwk should we choose to push it that far.

It will be either a 6266 or a 6466.

I have a 6466 on an rb28, and i expect in excess of 500awkw. Might be a little bit too extreme on a daily strees sil. Buut, look at PJ's THING, because thats what it is, a freakish THING. It has a monster and still makes powers that are usuable for speeding up the rotation of the earth arouns the axis of the suns, and stuff

Hahaha I laughed pretty hard when I read that! Pretty deep!

Allan, the 6466 on your 26 will be fine and will comfortably make the power ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...