Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
  • 9 months later...

I'll just vouch for BCs again...pulled out the passenger rear for a stripdown and clean after a creaking/groaning coming from that area. Over 3 1/2 years of daily driving and all the components still as good as new, no leaks from shocks, no issues at all. Definitely great stuff for the price of them.

  • 2 weeks later...

I'll just vouch for BCs again...pulled out the passenger rear for a stripdown and clean after a creaking/groaning coming from that area. Over 3 1/2 years of daily driving and all the components still as good as new, no leaks from shocks, no issues at all. Definitely great stuff for the price of them.

I'm in the same boat, over 5 1/2 years down the track; daily driven as well. BC BR's in my NM35 Stagea.

Coatings are all still perfect, all dust boots, and bushes are perfect.

No leaks, rattles or bangs; and absolutely no degradation of performance.

Way better than I ever expected for the $1200 I spent.

  • 1 month later...

If you want to make your BC's even better, fit them with swift springs. Their springs are more linear, lighter and give longer stroke.

Interesting, where can you get those from?

Also anyone in the know, can you please confirm if BC BR front and rear coils are interchangeable? I currently run 6kg front, 5kg rear and wouldn't mind experimenting with 8kg front, 6kg rear (the standard rates) - can I just swap my current front springs to the rear and buy some 8kg fronts? What's the easiest place to buy online in Aus?

...

Also anyone in the know, can you please confirm if BC BR front and rear coils are interchangeable? I currently run 6kg front, 5kg rear and wouldn't mind experimenting with 8kg front, 6kg rear (the standard rates) - can I just swap my current front springs to the rear and buy some 8kg fronts? What's the easiest place to buy online in Aus?

Answering my own question, just checked and my front springs are P/N 62.200.006 and rears 62.220.005. In other words, the fronts are 200mm whereas the rears are 220mm.

Spring diameter is the same and you might be able to get away with the 10% length difference but I'm not sure if I want to risk it... thoughts?

as you can adjust the spring perch at will to accommodate for the extra length and still keep same ride height, I couldn't see anything tragic happening. You might get more spring travel from the extra length? Try it.

  • Like 1

Interesting, where can you get those from?

Also anyone in the know, can you please confirm if BC BR front and rear coils are interchangeable? I currently run 6kg front, 5kg rear and wouldn't mind experimenting with 8kg front, 6kg rear (the standard rates) - can I just swap my current front springs to the rear and buy some 8kg fronts? What's the easiest place to buy online in Aus?

how do the 6kg and the 5kg ones ride and handle on the street? or even on a good bit of twisties? current coilovers in my r32 gtst arent the best and bc looks quite good from this thread

Most people I know get swift springs through Jesse streeter

Thanks Josh. I priced them and they're about twice the price of BC Racing, per spring, landed.

Also Swift only seem to have 60 and 65mm diameter, not 62 which is what my BC's came with.

as you can adjust the spring perch at will to accommodate for the extra length and still keep same ride height, I couldn't see anything tragic happening. You might get more spring travel from the extra length? Try it.

It all depends on whether you've got enough thread left in the direction you need to wind the spring perch to accommodate the longer springs. If it's there, it's not going to cost you anything to try it.

Thanks guys! I'm pretty sure there's enough thread left, I was mostly concerned about the shock travel with an (occasionally) fully loaded sedan.

Theory is though that with a 20% stiffer spring you'd have less travel over the same bump at the same speed than with the softer spring, right?

how do the 6kg and the 5kg ones ride and handle on the street? or even on a good bit of twisties? current coilovers in my r32 gtst arent the best and bc looks quite good from this thread

I've been very happy with them for almost 3 years now, highly recommended. I'm only considering stiffer because:

  • I did a track day at Sandown earlier this year and there's still a fair bit of body roll, despite the bigger swaybars I'm running
  • I recently got a ride in a Liberty with full remote adjustable Cusco setup, chassis bracing, the lot. It was sweet. I know it's totally apples and oranges but since I don't want to shell out for oranges I might just as well try stiffer springs :)

sounds great, if your car doesnt already have them maybe go for some poly bushings instead of stiffer springs? it would help reduce body roll and retain the good ride quality, plus its a maintenance item that you wont have to replace ever again

2 things - if you're tracking the car def go the 8/6 spring combo, they're a bit harsh on street sometimes but quite liveable. I woyldn't want softer on the track myself.

Also the chassis bracing you mention - i poo-pooed alot of the bracing you see for skylines - until i actually tried it, and now i'm a huge fan. PM me if you would like any further info on that, its already been covered in threads on here.

  • Like 1

I'm running them in a 10/12 combo on my r33 which sees 90% of its life at the track. They feel great on track and are not to stiff for street driving.

They are stiff enough for me to not need to run a thicker sway bar and still not get any roll.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...