Jump to content
SAU Community

Recommended Posts

Picked up some Sidchrome stubby ratcheting spanners and a 3 piece Ratchet set today.

Repco is having a 1/2 price clearance sale so cost me $49.99 for the ratchets (total) and $65 for the spanners.

My brother in law also bought a 64 piece socket set for $115.

Get in quick.

Edited by boxheadmr

Is this a good deal folks?

http://www.ebay.com.au/itm/SP-TOOLS-H-DUTY-TOOL-BOX-KIT-SPANNERS-SOCKETS-HAMMERS-PLIERS-SCREWDRIVERS-KC-/290682622113

Kinda need to spend money on tools, looks like I will save some cash in the long run as opposed to doing it piecemeal.

personally I would not buy a kit with AF tools, unless you use them for something. Try and find the same sort of size without the AF and save a bit.

I put together a set of the stuff I needed in EVA and its been great compared to having everything thrown in drawers loose.

BTW like Zeb said you may well find physical stores can match or better prices if you can pick up; they have good margins on those kits.

You want to be careful with the cheap stuff, ratchet handles and such tend to break.

Cheap sockets and spanners are fine as long as they are a good fit, you have to check how well the hex bit is shaped.

Maybe think about what tools you want to be good and what tools you can handle being cheap, then build up a set. I dont mind spending $100+ on a set of nice spanners.

And yeah af is useless unless you have some old or weird sht to fix.

post-89755-0-37979200-1398841735_thumb.jpg

A condensor for spraying at home. A copy of dads, his is much neater, mine works fine.

Bunnings copper pipe and air line fittings, Supercheap regulator/trap, plumbing shop brass fittings to adapt to the air fittings, and some bits from the junkpile to make a stand for it.

what other places can I try? what other brands do similar packages?

just work from their catalogue, and get a couple of quotes from local resellers. sp toolkits are here http://www.sptools.com/en/product-list-2014/tool-kits-en-2-3-4/#ty;pagination_contents;/en/product-list-2014/tool-kits-en-2-3-4/

most of my stuff is kincrome supplied by a local auto one, but you could also order them thru bunnings (lowest price guarantee). I'm not a tool brand whore but didn't want cheap either (broken tools cause ouchies).

No.

While they aren't going to be starwille or hazet

They aren't shit

Good to know.

Plenty of good tools are cheap, but knowing which ones is the trick.

I like Kinchrome level of quality, and some things i want nice i get Sidchrome. Snap-on and such prices are a joke.

  • 4 weeks later...

Ive never seen, nor would i want a ratchetting tap wrench. When cutting a thread you should be constantly turning it a bit backwards after a short cut forward just to make sure the metal doesnt tear and continues to cut

Ok thx -Irwin among others make them and there seem to be a few around on eBay etc (but obviously questionable quality). The ratchet mechanism seemed like it could be useful for tight spaces but I see what you mean.

Starrett T handle wrenches seem reasonably priced and plenty of good reviews. Might just grab one from Amazon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...