Jump to content
SAU Community

Recommended Posts

Pardon if already mentioned but I couldn't find what ECU you are using. Still stock?

It's using a PowerFC which runs everything well. I do want a racepak iq3 dash as a silver bullet for engine monitoring, shift lights, logging etc which won't work with it. Might be able to direct wire it but not a nice neat solution.

Engine monitoring is high on the agenda at the moment.

Hope the tune goes smoothly. :)

Cheers me too!
  • Like 1

I think Links also do something similar to an IQ3 that would probably plug and play with their ECUs..might be worth looking into. I imagine your PowerFC would sell easily if you were keen.

EDIT: Looks like Haltech have an IQ3 as well..

Edited by nk7

I've just started fitting 1 of these to my GTR, good thing thus far, use's cheap Bosch sensors, and is 100% stand alone.

mine was $736 with the exchange rate at the time,

http://www.race-technology.com/dash2_2_31.html

I've just started fitting 1 of these to my GTR, good thing thus far, use's cheap Bosch sensors, and is 100% stand alone.

mine was $736 with the exchange rate at the time,

http://www.race-technology.com/dash2_2_31.html

Not bad. A bit over $850 if you buy locally I believe...

Word is the tune is finished. Some of the near 25 year old coil packs didn't make the cut so a set of split fires have gone in.

Best bit is it was happily making 336/337/338 rwkw which Chris reckons you don't see often with gt-ss on 98, been wound back a bit to 330rwkw @20psi - very happy with that!

Should be picking her up tomorrow arvo.

Awesome to hear it is running and well at that! :thumbsup:

So , have you given any thought to what the next car is going to be?

Halves in an R300 kit that we can throw a S2000 motor in?

Its not the same tinkering on my car and talking to myself. I should never have left Cliff behind in Portugal, he was always there for me and I just threw him away :(

gallery_462_50_10868.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...