Jump to content
SAU Community

Recommended Posts

just washed mine after a run up the mountain on wednesday (was fithly after it)

got a hose onto it and gave the underside a good spray

i cant belive how much mud/dirt/rocks there were stuck under the side skirts and hiding away in the rear bumper

i reckon about 20kg of dirt came off the underside and i dont think it was all from that one trip

Well picked up my first stag yesterday 97 model and has 25t xfour written on the back got cream leather interior the satelite navigation tv screen in it has a full 3.5 inch TBE and hks turbo timer also has 18inch rims look like volks of some sort but gotta pull them off and have a look and the best part is I picked it up

for two grand with 8 month rego any how will be going in next week to have a new crossmember put in as the one in it is twisted and also will be getting a FMIC and injectors and eboost 2 put in and then have a tune done so will let you know how it all goes.

Patrick

nice 1.

finished with the stagea for now. last mod was the r32 gtr front calipers. 249rwkw.

working on doing up a r32 4door gtst sedan, with r30 manual & rb26dett engine.

excited. boat finally brought my container.

tomorrow get to p/up stich mags ($30 pound!).... these will hopefully fit the stagea

grex camshafts, spats strut bar, 6-point roll cage

exhaust temp sensor, turbo timer, bride left hand seat rail

bride drivers chair, apexi power intake piping kit

got all the parts for the rb26 buildup in the cupboard now:

hks oil pump, hks step 2 cam springs, n1 water pump, acl race bearings

hks 87mm pistons, attkd rods, arp bolts, arp main head studs

cometic street pro full gasket kit incl 87mm mls head gasket

tomei sump baffle pickup kit, tomei oil gallery orifice, ati harmonic balancer

greddy timing belt, new idler/tensioner, adjustable intake/exhaust cam pulleys

30-row engine oil cooler, oil filter relocation kit, turbo oil cooler

hks split dump pipes, obx tuned-length manifolds, obx front pipe system, decat flex pipe

fitted wilwood superlite forged 4-piston calipers with 324mm drilled rotors up front.

got to install the external fuel pump and fuel surge tank system, then attack the exhaust

and sort out the seats, weld in roll cage and add to it, fill the belt/seat mounts in (eventually rego for 2seater?)

I changed the timing belt and caused the check engine light to come on.... :D

^^^ oh........pull the globe it will be fine!!! lol

speaking of pulling globes... kidafa not that long ago changed his dash to blue LED's... and didnt put his petrol light globe in properly...

needless to say he got a rather decent mileage to that tank...:D:D

Yesterday:

Hacked up the CF-look centre console plastic to graft an R34 manual shift console onto. But 50% done. All cutting/trimming is done, now I just need to plastic weld it all together and bog up the gaps. Later it all gets covered with some real CF. :bunny: Should be finished by early June.

Touched up/puttied and resprayed my front Aero type M bar.

While I had the bar off, refitted the electric fan in front of the a/c condenser.

Had to remove the FMIC to refit the fan, so I also discovered a 10mm size hole in the intercooler, from a bolt on the chassis rubbing thru. :thumbsup: Fixed it up, refitted and test drove it after. Bit more responsive now :banana:

In the next fortnight, I'll be upgrading my brakes to a 325mm kit. :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...