Jump to content
SAU Community

Recommended Posts

unfortunately that is a characteristic of bush bearing turbos.

expect about 1000rpm over the same size ball bearing turbo. I know the pain too well.....the race car runs standard n1 turbos which are big bush bearing ones.

I don't think its 1k more. lol. Possibly 200 revs more to get it spinning, then a faster ramp. It will come on much harder with more top end if tuned right. (with the Sierra wheels anyway.) People under-estimate well built bushed cores, the 360 degree thrust washers make a huge difference.

I have much better response than Craig with his Garrett core, he has a slightly larger turbine on his 3071 and made about 20kw more on petrol.

Deleted the VQ35 Throttle body warmer/coolant loop today. $2 of clamps, quite a bit of swearing- bloody tight some of these places on these cars!

You VQ25dets have the same system? You might find you got your lovely HDI intercooler only to be running air through a 70oC Throttle >_<

Well, I finally bought some engine oil for mine, and am thinking of buying one of those Fumoto sump plug drains to make life even easier again! I've already got an oil filter relocation kit, so that helps!

do it mate, so easy.

changed the oil to castrol edge 0-40, new ryco oil filter & will do the fuel filter change after next 10% eflex fuel mix; just to clean any crap out of the system.

changed the brake kit bolts to 14mm from 12mm, like I should have done at the beginning, and added some squeal brake goo.

thats it for a while, need to regas the A/C and get a wheel align.

Deleted the VQ35 Throttle body warmer/coolant loop today. $2 of clamps, quite a bit of swearing- bloody tight some of these places on these cars!

You VQ25dets have the same system? You might find you got your lovely HDI intercooler only to be running air through a 70oC Throttle >_<

huh...photo's...what you talking about?

In a VQ35 the intake is heated via a coolant circulated around the Plenum, just behind the TB. Basically takes it right out of the main metal coolant lines.

It circulates up into the Plenum via a small rubber hose and then back down the other side behind the motor.

You can see in the pic, companies sell little gadgets to re-route coolant past the TB, but all you really need is time, a bit of brass pipe the right size, and a couple of small clamps.

Edit - the reason its heated is to stop the TB sticking in below freezing climates. So don't do it if you live in the snow. If it never gets that cold where you are, its just making your intake hot...

make sense?

medium_350ZG35M35FX35CopperIsoThermalupgrade130l.jpg

Edited by PN-Mad

I guess no need since your intake is exhaust heated...

Whats a guy to do if he found a very cheap Z33 HKS GT3037 turbo kit...? Thoughts?

As per dcdc! Now your talking...will the little woman approve though!

I don't think its 1k more. lol. Possibly 200 revs more to get it spinning, then a faster ramp. It will come on much harder with more top end if tuned right. (with the Sierra wheels anyway.) People under-estimate well built bushed cores, the 360 degree thrust washers make a huge difference.

I have much better response than Craig with his Garrett core, he has a slightly larger turbine on his 3071 and made about 20kw more on petrol.

yeh its not that much worse.

i find that its hitting full boost at 4000rpm.. before i was hitting boost on 3400rpm

and that was a stock sized turbo but just ball bearing. so basically immitating stock.

my fans now I think are the same size as craigs(almost) so im kinda happy that its not that much worse.. you just notice it without a tune i guess.

Well I dropped the car off at RVO in dandenong to get the shift kit installed, and to have the line pressure ramped right up "without braking anything" Ive told him I atleast wanna try and get a year out of it so i can save for a full rebuild, or to do the Manual/rear wheel!

I know half of you Sydney boys want it done so I'll be sure to let you know once I get it back tonight!

for people in melbourne, $550 installed.

I think for those sending the valve body down it's $450.(+ whatever shipping cost's)

Well I dropped the car off at RVO in dandenong to get the shift kit installed, and to have the line pressure ramped right up "without braking anything" Ive told him I atleast wanna try and get a year out of it so i can save for a full rebuild, or to do the Manual/rear wheel!

I know half of you Sydney boys want it done so I'll be sure to let you know once I get it back tonight!

for people in melbourne, $550 installed.

I think for those sending the valve body down it's $450.(+ whatever shipping cost's)

Ahh that's right...the EMU Trans fix that Cihan mentioned has something to do with upping the line pressure...

Ahh that's right...the EMU Trans fix that Cihan mentioned has something to do with upping the line pressure...

doesnt change the fact you will still need a shift kit. for the power your going for though Cihans emanage hack should fix it..

doesnt change the fact you will still need a shift kit. for the power your going for though Cihans emanage hack should fix it..

How are they upping the line pressure?

How are they upping the line pressure?

who? the trans joint or Cihan.

Cihan's I think adjusting this through the emanage, he says he thinks he may have found a way to get around it.

RVO Automatics, with a shift kit.. f**ked if I know how else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...