Jump to content
SAU Community

Recommended Posts

So after bolting up 17x8 and 17x9 enkei's to the RS4S, I had to readjust the rear camber arms for less -camber to clear the shock. What I didn't notice was that it creates toe out like crazy. After driving for 10 mins the car is just too nervous even on flat road and head home.

I jacked the car back up, look around and notice that the rear HiCas arms are adjustable. Sweet. After eyeballing it with a spirit level flat across the rim to the body I have removed the toe out (which gave even more clearance to the shock) and the car tracks straight and handles great just like before.

Will be getting it properly aligned by Bob Jane @ Nerang again. Apparently their machine is the best in oz. (Their claim not mine).

Heres my last alignment by them late last year out of their dying printer

post-58831-0-11591600-1297853616_thumb.jpg

Jez

mounting my informeter today, also tried to install my tv tuner but hit a snag, misplaced my adaptor cable and still a little fuzzy on how there installed hahaha,

also put stock airbox on today.

Late last week, finally installed my new turbo. Had it finished by the Saturday and driving to the SMASA show on the Sunday. :thumbsup:

Took a dead RB25 turbo and MTQ built me a Garrett 3076 ... got braided lines and all. I'm just babying it around until I get her tuned. Got 575cc injectors coming. Then the injectors and the brand new Z32 AFM I have in my garage will go on just before I drive the Stag to Willall for the tune.

:D

  • Like 1

Lately??.....Scotty made my new dump last week which meant that last Thursday was the day for fitting it along with the full Freeway-Dolphin exhaust. Huge thanks to Scott for all his efforts. :worship: Very noticeable difference in power. Quite loud and when compared to the Legalis. A bit of getting used to (noise) but happy all round. Whilst at Scott's booked another trip to Japan......More Stagea lovin' coming up...

the rb26 was pulled out of the wagon yesterday and the car was trucked off to the paint shop today to have engine bay, brake calipers and engine covers painted the ball is finally rolling

Edited by 260rsstagea

the rb26 was pulled out of the wagon yesterday and the car was trucked off to the paint shop today to have engine bay, brake calipers and engine covers painted the ball is finally rolling

sounds good....what else you doing?

Oh Jealousy over you have the 260rs and me not!.....great car's!

I did a bit of panel beating, removed two cylinders, re connected my abs plug to make it 4wd put on a better turbo, some recaros added a few more mods and this is what happened to my stagea.

post-31456-0-09628500-1297974607_thumb.jpg

sounds good....what else you doing?

Oh Jealousy over you have the 260rs and me not!.....great car's!

step 3 rb28 is goin back in it the new engine is sitting on a stand currently just waiting once engine is in back to paint for full custom 2 tone paint with white ice pearl over the top then full custom retrim of interior

I did a bit of panel beating, removed two cylinders, re connected my abs plug to make it 4wd put on a better turbo, some recaros added a few more mods and this is what happened to my stagea.

post-31456-0-09628500-1297974607_thumb.jpg

Things looking better for you Andrew.. :)

How are you going with my stock dump pipe? You can show me the new car when you droop it around?

Things looking better for you Andrew.. :)

How are you going with my stock dump pipe? You can show me the new car when you droop it around?

The way things are going with that i'm not happy! my mates dicked me around for months with it, i've bought all the bits and pieces to do it but still no luck with him..

the evos still not registered yet, but no doubt when my mate pulls his fingers out it will be.. lemme know if you need it back in the mean while and i'll pop over..

step 3 rb28 is goin back in it the new engine is sitting on a stand currently just waiting once engine is in back to paint for full custom 2 tone paint with white ice pearl over the top then full custom retrim of interior

Very nice dude!

I'm booked in for a new, bigger radiator in the morning.. not quite as exciting as your adventures :P

interested to know what you did to make the stagea look like that, pretty keen on doing it myself ;) tuff car mate!

I got a sledge hammer, bucket of paint and a few sticks of explosives..

turned out pretty good huh.

i might start a business! turning volvos into mitsubishi looking trash!

I got a sledge hammer, bucket of paint and a few sticks of explosives..

turned out pretty good huh.

i might start a business! turning volvos into mitsubishi looking trash!

i know a few people who would love it if you did this to their car lol

just bought a Kakimoto R of through Jesse Streeter, managed to pick it up for $600~

I should be seeing it mid march, he has to wait till Kakimoto send one to him :(

just bought a Kakimoto R of through Jesse Streeter, managed to pick it up for $600~

I should be seeing it mid march, he has to wait till Kakimoto send one to him :(

Good pickup! My new rotors and brake pads should be arriving this week. Shame my mechanic is in Thailand at the moment :rolleyes:

What have I been doing lately? Except the screaming that I want my stag on the road again...

Blow parts of the engine in august, in a period without the cash to rebuild it again at the moment. But it was a nice blow - like the formula1 breakdowns with 300meters of smoke. ;-)

More pictures at: http://gatbilar.se/s...san_Stagea_RS4/

4ce073124ea80.JPG

4d0e951a2b510.jpg

4d0e950c69c5b.jpg

4d0e950361fc8.jpg

4d095bc52393d.JPG

4d1b8e0763cba.JPG

(2*3076, but I'm changing that for One GT35 instead...)

4d4aec079bb8e.JPG

4d4aed0445094.JPG

4d5b0f13d56b2.JPG

We have only got -15degrees C at the moment and I've got a garage without heating, so I do the work at the livingroom. ;-)

I hope to have a drivable car at the end of Mars - and I hope the rods hold out for one season at their absolute limit. I'll guess the gearbox will blow really soon. :-)

There is some things happening in Sweden. ;-)

Installed Trust/Greddy suction kit.

Bitch of a job, HKS intercooler piping and stagea engine bay add up to make quite a tight fit.

Will be starting on a polycarbonate box for the pods tomorrow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...