Jump to content
SAU Community

Recommended Posts

So after bolting up 17x8 and 17x9 enkei's to the RS4S, I had to readjust the rear camber arms for less -camber to clear the shock. What I didn't notice was that it creates toe out like crazy. After driving for 10 mins the car is just too nervous even on flat road and head home.

I jacked the car back up, look around and notice that the rear HiCas arms are adjustable. Sweet. After eyeballing it with a spirit level flat across the rim to the body I have removed the toe out (which gave even more clearance to the shock) and the car tracks straight and handles great just like before.

Will be getting it properly aligned by Bob Jane @ Nerang again. Apparently their machine is the best in oz. (Their claim not mine).

Heres my last alignment by them late last year out of their dying printer

post-58831-0-11591600-1297853616_thumb.jpg

Jez

mounting my informeter today, also tried to install my tv tuner but hit a snag, misplaced my adaptor cable and still a little fuzzy on how there installed hahaha,

also put stock airbox on today.

Late last week, finally installed my new turbo. Had it finished by the Saturday and driving to the SMASA show on the Sunday. :thumbsup:

Took a dead RB25 turbo and MTQ built me a Garrett 3076 ... got braided lines and all. I'm just babying it around until I get her tuned. Got 575cc injectors coming. Then the injectors and the brand new Z32 AFM I have in my garage will go on just before I drive the Stag to Willall for the tune.

:D

  • Like 1

Lately??.....Scotty made my new dump last week which meant that last Thursday was the day for fitting it along with the full Freeway-Dolphin exhaust. Huge thanks to Scott for all his efforts. :worship: Very noticeable difference in power. Quite loud and when compared to the Legalis. A bit of getting used to (noise) but happy all round. Whilst at Scott's booked another trip to Japan......More Stagea lovin' coming up...

the rb26 was pulled out of the wagon yesterday and the car was trucked off to the paint shop today to have engine bay, brake calipers and engine covers painted the ball is finally rolling

Edited by 260rsstagea

the rb26 was pulled out of the wagon yesterday and the car was trucked off to the paint shop today to have engine bay, brake calipers and engine covers painted the ball is finally rolling

sounds good....what else you doing?

Oh Jealousy over you have the 260rs and me not!.....great car's!

I did a bit of panel beating, removed two cylinders, re connected my abs plug to make it 4wd put on a better turbo, some recaros added a few more mods and this is what happened to my stagea.

post-31456-0-09628500-1297974607_thumb.jpg

sounds good....what else you doing?

Oh Jealousy over you have the 260rs and me not!.....great car's!

step 3 rb28 is goin back in it the new engine is sitting on a stand currently just waiting once engine is in back to paint for full custom 2 tone paint with white ice pearl over the top then full custom retrim of interior

I did a bit of panel beating, removed two cylinders, re connected my abs plug to make it 4wd put on a better turbo, some recaros added a few more mods and this is what happened to my stagea.

post-31456-0-09628500-1297974607_thumb.jpg

Things looking better for you Andrew.. :)

How are you going with my stock dump pipe? You can show me the new car when you droop it around?

Things looking better for you Andrew.. :)

How are you going with my stock dump pipe? You can show me the new car when you droop it around?

The way things are going with that i'm not happy! my mates dicked me around for months with it, i've bought all the bits and pieces to do it but still no luck with him..

the evos still not registered yet, but no doubt when my mate pulls his fingers out it will be.. lemme know if you need it back in the mean while and i'll pop over..

step 3 rb28 is goin back in it the new engine is sitting on a stand currently just waiting once engine is in back to paint for full custom 2 tone paint with white ice pearl over the top then full custom retrim of interior

Very nice dude!

I'm booked in for a new, bigger radiator in the morning.. not quite as exciting as your adventures :P

interested to know what you did to make the stagea look like that, pretty keen on doing it myself ;) tuff car mate!

I got a sledge hammer, bucket of paint and a few sticks of explosives..

turned out pretty good huh.

i might start a business! turning volvos into mitsubishi looking trash!

I got a sledge hammer, bucket of paint and a few sticks of explosives..

turned out pretty good huh.

i might start a business! turning volvos into mitsubishi looking trash!

i know a few people who would love it if you did this to their car lol

just bought a Kakimoto R of through Jesse Streeter, managed to pick it up for $600~

I should be seeing it mid march, he has to wait till Kakimoto send one to him :(

just bought a Kakimoto R of through Jesse Streeter, managed to pick it up for $600~

I should be seeing it mid march, he has to wait till Kakimoto send one to him :(

Good pickup! My new rotors and brake pads should be arriving this week. Shame my mechanic is in Thailand at the moment :rolleyes:

What have I been doing lately? Except the screaming that I want my stag on the road again...

Blow parts of the engine in august, in a period without the cash to rebuild it again at the moment. But it was a nice blow - like the formula1 breakdowns with 300meters of smoke. ;-)

More pictures at: http://gatbilar.se/s...san_Stagea_RS4/

4ce073124ea80.JPG

4d0e951a2b510.jpg

4d0e950c69c5b.jpg

4d0e950361fc8.jpg

4d095bc52393d.JPG

4d1b8e0763cba.JPG

(2*3076, but I'm changing that for One GT35 instead...)

4d4aec079bb8e.JPG

4d4aed0445094.JPG

4d5b0f13d56b2.JPG

We have only got -15degrees C at the moment and I've got a garage without heating, so I do the work at the livingroom. ;-)

I hope to have a drivable car at the end of Mars - and I hope the rods hold out for one season at their absolute limit. I'll guess the gearbox will blow really soon. :-)

There is some things happening in Sweden. ;-)

Installed Trust/Greddy suction kit.

Bitch of a job, HKS intercooler piping and stagea engine bay add up to make quite a tight fit.

Will be starting on a polycarbonate box for the pods tomorrow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hooley Dooley these things have some history! If i sell them they will need a certificate of providence to prove they have been in the hands of verified RB20 royalty! They have been stored in a plastic tub, away from sunlight and moisture. They are in mint condition. And they will stay that way, as i have sprung the money for a set of shockworks coilovers. I'm just working on getting them in at the moment, after rebushing the rear of the car, and while the subframe was out i welded in the GKtech reinforcement bracing as well.  They will get a workout at Ararat King of The Hill in November. I ran 48s on the short course there a few months ago, and i am hoping with new bushes and shocks in the rear i can launch a bit harder. There was a fair bit of axle tramp when i tried too hard off the line. a few of the corners had dips mid way which also made the car feel a bit unsettled, hopefully this will help there too.   
    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
×
×
  • Create New...