Jump to content
SAU Community

Recommended Posts

This is what I'm aiming for, what's your setup?

Autech 260RS

Stock bottom end

Stock FPR

R34 GTR turbos < Terry's old turbos :whistling:

Nismo 555cc injectors,

Walbro fuel pump

Power FC

AVCR

Z32s

Greddy suction kit and cold air box with factory snorkel

HKS 264 deg cams

HKS cam gears

HKS hard piping kit

Yoshida Garage custom ported head and port matched exhaust manifolds

Greddy extended split dumps and front pipe

Fujitsubo Cat back

Gutted cat

N1 oil and water pumps

Greddy oil cooler kit

Turbosmart BOVs

312.5kW at 16.5 psi

272kW at 13 psi

yep, the jaycar kit, works perfectly. Just tapped the speedo wire at the dash and hid the box up behind the hazard light switch. It's been in there a while bu I had to adjust it because I've changed rim/tyre size recently.

Nismo dash is the main reason I had to fix the speedo. A big digital speedo is just annoying when it's wrong!

stagea_dash.jpg

Drunkan, you've fixed the speedo, but the tacho looks like the reading is out of whack too. And what wheels and tyres are you running now? Pics please?

Oil change (my last bottle of GW Sougi s6000), and a yearly inspection of the turbo oil feed banjo. Was enlarged to 1.5mm last year.

Sparkly clean as usual; but 15 minutes well spent.thumbsup.gif

Looks like I'll be changing to the new GW SYN-X 6000 for the next one.

Oil change (my last bottle of GW Sougi s6000), and a yearly inspection of the turbo oil feed banjo. Was enlarged to 1.5mm last year.

Sparkly clean as usual; but 15 minutes well spent.thumbsup.gif

Looks like I'll be changing to the new GW SYN-X 6000 for the next one.

I checked my banjo this week and it was squeaky clean. I didn't enlarge the size of it though.

Edited by slippylotion

I checked my banjo this week and it was squeaky clean. I didn't enlarge the size of it though.

Whether or not to enlarge seems to be a personal thing; to each his own. There's no question; it's cheap insurance to remove & inspect.thumbsup.gif

Autech 260RS

Stock bottom end

Stock FPR

R34 GTR turbos < Terry's old turbos :whistling:

Nismo 555cc injectors,

Walbro fuel pump

Power FC

AVCR

Z32s

Greddy suction kit and cold air box with factory snorkel

HKS 264 deg cams

HKS cam gears

HKS hard piping kit

Yoshida Garage custom ported head and port matched exhaust manifolds

Greddy extended split dumps and front pipe

Fujitsubo Cat back

Gutted cat

N1 oil and water pumps

Greddy oil cooler kit

Turbosmart BOVs

312.5kW at 16.5 psi

272kW at 13 psi

Nice Build, bet its great to drive

I was just wondering how the Power FC goes with the 260RS, Im assuming you used the one specific for the R33 GTR/RB26

Did you have any issues getting it to work, does anything not work as its meant to.

from what i have read it "should" work fine in the stag but i have not asked anyone who has actually done it,

Thanks

Nice Build, bet its great to drive

I was just wondering how the Power FC goes with the 260RS, Im assuming you used the one specific for the R33 GTR/RB26

Did you have any issues getting it to work, does anything not work as its meant to.

from what i have read it "should" work fine in the stag but i have not asked anyone who has actually done it,

Thanks

No problems here

Drunkan, you've fixed the speedo, but the tacho looks like the reading is out of whack too. And what wheels and tyres are you running now? Pics please?

Yeah mate that tacho is wierd....lucky mid 90s LCDs had such crap resolution. It consistently reads 500rpm high, not like the speedo that was a % wrong (ie wronger the faster you go)

I've got R34 GTR rims (finally clearning the brakes properly) and 255/40/18 Federals. No pics it's too wet :P

Also fit Z32 AFM today, total fail. SOmeone has played silly buggers with the Z32 AFM curve on my Powerfc and it's not running properly. I'll probably put the standard AFM back on until I can get a tune.

Nice Build, bet its great to drive

I was just wondering how the Power FC goes with the 260RS, Im assuming you used the one specific for the R33 GTR/RB26

Did you have any issues getting it to work, does anything not work as its meant to.

from what i have read it "should" work fine in the stag but i have not asked anyone who has actually done it,

Thanks

I am running a R32 GTR PowerFC and the car runs fine, an R33 PowerFC would also work.

I Run a R33 PFC (on a R33 RB26) with almost identical setup, minus the inlet and hard piping kit, but I'm still around 20kw short of your power. Guess its time to order those Z32s and the Greddy kit then... thumbsup.gif Good to see whats possible with stock bottom end and turbos...

Found a little cubby hole for a oil catch can today. Hopefully will minimise the amount of oil going out the end of these bloody VQ's. Have to go to pirtek tomorrow and get some real hose- as usual the stuff they give you is massively shit.

Had fun packing that mother full of steel wool!!!!cool.gif

you need one from an RS with hicas, or an ARX. but only vq25det

Not true. Pretty sure Craig said 350Z 5MT rear diff, but I'd have to check.

I think the VQ25DD front diff is the good one though, haven't double checked yet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
×
×
  • Create New...