Jump to content
SAU Community

Recommended Posts

Finally have the car back!

-New front bearings

-New front break rotors

-New whiteline rear sway bar linkages

-Hypergear High Flow (G1 i believe)

-Scotty Dump & Front pipe

-3.5" rear pipe(thanks again Scotty!)

-New smile, connecting left ear to right ear

(-Potentially new missus when she realises exactly how much i have spent and why we are no longer renovation the house over xmas!)

Huge thanks to R&D Mechanical for doing all the work too!

  • Like 4

Nah sorry mate no pics, also, i have the stock rear pipe & muffler on atm.

Last thing i needed was the missus sitting in the car next to me for 3 day asking why i spent 4k to make the car "noisier" :P

When i get back ill have it refitted, that way i can go the straight pipe or mid muffler or whatever suits me. Ill take some happy snaps then too!

got to love bathurst weekend

get some work done on the cars

stagea has new oil
fitted up the washer bottle ( coverts s1 rs260 into a s2)
new gb oil
new diff oil
new power fc to run the z32 metres

might even give it a was
DSC_0392_zps180b59dd.jpg
fix intake gasket
DSC_0393_zpsca3b27d1.jpg
and a new g sensor
DSC_0394_zps48126821.jpg

  • Like 1

installed complete squid conversion headlights with xenon's as my old set had the conversion to suit normal off the shelf globes.. was gaaaay.. and were so yellowed. new set came off a c34 with about 80000kms.

Got some custom plates waiting to go on " MR C34".. Currently have "RSC 304".

possibly buying a s2 NA grille.

post-61050-0-00671100-1413803047_thumb.jpg

post-61050-0-97348700-1413803052_thumb.jpg

post-61050-0-88724700-1413803054_thumb.jpg

  • Like 3

so this week

new windscreen in as the wife's car subi turbo blew on Tuesday so got the windscreen put in and driving with a little dent in the roof from the tree, installed safc and rsm on Friday so having a play with that

^ nice, so it wasn't written off?

Well I brought it back from Shannon's for a steal, waited and had nothing form qld roads about rego, checked rego and still registered so put a windscreen in it and now driving if, looks terrible but u get that!

  • Like 1

Last week i replaced the plugs in our m35 cos it ran like crap. Sure enough the electrode gap opened to almost 1.5 mm. And was blowing the boost out.

Now it really hammers. Turns out the combo of hiflo turbo and turbo back exhaust cranks boost to 16 psi (installed new gauge too).

But then 3 days later i go ahead and stack it on the way back from work.

So now its in the panel shop

Replaced the passenger side Cam Angle Sensor cause ANNOYYYINNNGGGG!!!!!!

bout 2 weeks till hypergear highflow goes in so i'm trying to get the car running as best as i can by then :P

  • Like 1

Haven't posted here before. Owned my Stagea for nearly 2 years now and I've done the following mods:

BC coilovers

3 inch straight pipe

Yellow jacket coilpacks

Leather interior

Boost tee

Custom front mount intercooler

Roof racks/fairing

Bigger wing

Dayz front bar

Dayz rear lip

Dash gauges boost & oil temp

Black headlights

Full manual conversion at home waiting to be put in.

Photos from when I first bought it, til now.

post-86305-14152572826096_thumb.jpgpost-86305-14152573074559_thumb.jpgpost-86305-14152573706796_thumb.jpgpost-86305-1415257464052_thumb.jpgpost-86305-14152575095233_thumb.jpgpost-86305-14152575442059_thumb.jpg

  • Like 2

new stuff from RU with love) 50 mm core CSF race radiator, SPAL fans, CNC custom made brackets. replacing 38 mm all-the-aluminiun no-name radiator and full-frame plate for fans (worked well, but i can't sit without new parts - i'm cooling fan)

old one:

3df85a8s-960.jpg

43f85a8s-960.jpg

http://www.drive2.ru/l/820268/ - more pics by link

replaced with real porn one)

cc483ecs-960.jpg64483ecs-960.jpg

68483ecs-960.jpg

1f883ecs-960.jpg

more pics - http://www.drive2.ru/l/4893936/

am i right with welding temp sensor in upper bank?

fans are precisely regulated by PWM controller, which reads from 1/8 NPT sensor (i use OEM, same as ECU's main)

  • Like 4

Looks good Erop! Any significantly measurable drops in temperature?

I popped another OEM AFM yesterday (I think that's my third?), I was only 1km from home though - so not too far to limp it. I fortunately had one of Scottys 'after market' units on hand so I swapped that in & it was happy days. Haven't bothered to clear the code yet, but its driving fine ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...