Jump to content
SAU Community

Recommended Posts

i can currently get toluene cheaper than 98 0ctane petrol .

what are peoples thoughts on using it in cars ?

can anyone one tell me what happens if you put too much in a standard car ?

or any other knowledge .

cheers

how the hell do you get it cheaper than 98? i spent ages trying to find it cheap over here and gave up

general consensus is you shouldnt run any more than 30% in a road car, which should be more than enough to make some decent fuel when mixxed with 98

Edited by JonnoHR31

Toluene used to be very popular for making racing fuels with mixes of between 10 -30% which gave an increase in RON of about 3. It is lead free and doesn't stuff O2 sensors. It will def make your car go faster if properly tuned. I don't know if there are any longterm downsides. As to toxicity - petrol and petrol fumes already contain aromatics and are bad for your health so in all cases avoid the fumes and getting it on your skin.

I looked into it for ages. Couldnt get it just off the street. I even asked a good mate who is a professional painter to get the stuff..... no go in the volume i wanted. Cut a long sotry short.... Upgrade your fuel system to handle E85. Once that is done its cheap and getting more and more easy to get.

E85 is not available at the pumps in NZ and very expensive to get. Note OP has a supply of toluene available at a good price. Petrol is not very good for you either - no-one is planning to drink the stuff.

Surely there are some old racers out there ( and we are talking 5 -10 years ago) who can advise of any downside to Toluene as a fuel?

E85 is not available at the pumps in NZ and very expensive to get. Note OP has a supply of toluene available at a good price. Petrol is not very good for you either - no-one is planning to drink the stuff.

Surely there are some old racers out there ( and we are talking 5 -10 years ago) who can advise of any downside to Toluene as a fuel?

I used to add a 20% mix of toluene to 98. The difference was quite noticable on the dyno over straight 98. Also added some measure of insurance when drag racing. This was back in 2004-2006.

Just wear gloves when you pour it and DON"T BREATH IT IN!!! A 30% mix is about all you can get away with.

Toluene is a little harder on your fuel lines, but who cares if you replace them every 3 or 4 years!

Cheers

Justin

http://en.wikipedia.org/wiki/Toluene Look at the list of things it will dissolve, and ask yourself what are all your fuel hoses made out of.

petrol also eats rubber, which is why you use fuel hose instead of standard rubber hoses in your fuel system.

cheers for that justin .

on a side note i do know someone that put a couple of tanks of it straight through a nx coupe . it did go alot better up top . said nx coupe was in no way maintained or tuned properly . and it still went long enough for it to be crashed into a wall .

what happens if you run 100% in an untuned car ? will it lean out and melt some ringlands ?

  • 4 weeks later...

I've ran toluene in my cars, lawn mowers, weed trimmers, etc. for years and hadn't had any problems.  Now experimenting with moth balls (real naphthalene) and carb/throttle body cleaners (ingredients appear similar to bottled octane boosters, and dissolves moth balls quickly).  I wish there was an easy and reliable way to test octane for the average person. My neighbors probably think that I am running a meth lab at home.

Direct from wiki:

"Toluene at 86% by volume fueled all the turbo Formula 1 teams in the 1980s, first pioneered by the Honda team. The remaining 14% was a "filler" of n-heptane, to reduce the octane to meet Formula 1 fuel restrictions. Toluene at 100% can be used as a fuel for both two-stroke and four-stroke engines; however, due to the density of the fuel and other factors, the fuel does not vaporize easily unless preheated to 70 degrees Celsius (Honda accomplished this in their Formula 1 cars by routing the fuel lines through the muffler system to heat the fuel). Toluene also poses similar problems as alcohol fuels, as it eats through standard rubber fuel lines and has no lubricating properties as standard gasoline does, which can break down fuel pumps and cause upper cylinder bore wear."

In other words, it does not suit Joe Blow back yarders trying to save a buck. Engine(s) cost more than fuel in the long run.

Google time.

good luck, i spent a fair bit of time looking into it a while back and couldnt find any for less than ~$10/L here in perth, which is too expensive to use as a fuel. cheaper to buy e85 drums

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here's a boring history lesson on number plates People want illegal spacing to make their plate more readable, if mine was J2X BK, anyone who knows about the car would see that its spelling JZX. Years ago third party plate manufacturers could alter the text to make it look like something else, nowadays the computer software is locks that ability (well, ours does at work) Up until 2001 the first letter of a number plate represented the year of the vehicle, for example A would be 1983. (pre 1983, the format was backwards, so the year letter was on the end). Followed by 3 random numbers and 3 random letters. Things started to get complicated at the end of the 90s where T and V were 1999, W and X were 2000 and Y was early 2001. From 2001 they introduced a new 'layout' where the first two characters are letters, this represented where that vehicle was first registered in the country. The letters corrosponded to a region in the country. Some regions had a large number of codes, where as some only had a couple (despite being large in physical land size) Next are 2 numbers to indicate 2000s. So it went from: Y (March 1999 > Aug 2000) 51 (Sept 2001 > Feb 2002) 02 (March 2002 > Aug 2002) 52 (Sept 2002 > Feb 2003) etc etc When the 2010s got here, the numbers changed again, going up by tens 10 (March 2010 > Aug 2010) 60 (Sept 2010 > Feb 2011) When the 2020s arrived it went to 20 (March 2020 > Aug 2020) 70 (Sept 2020 > Feb 2021) etc As for personalised plates, you're not allowed a registration that makes the vehicle look newer. Take my 110 for example, its a 2004 car so I can have any available plate upto 04. I can't have a 54 because it was manufactured in August 2004. Which allows me to have a J plate, because its older (if that makes sense)    
    • Mount some of these on your dash? https://www.greddy.com/products/16001720  
    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
×
×
  • Create New...