Jump to content
SAU Community

Recommended Posts

Hi guys before you start telling me off about how illegal and dangerous and bad it is to do so, I'm just asking for some opinions and thoughts about my question, not the ethics behind it, thanks.

So tonight, I dragged my manual stock 99' R34 coupe against my mate's stock 97' ej8 Honda civic and barely beat him. He's running a 1.6L single cam engine, while I have a 2.5L twin cam rb25de....what amazes me is that he kept up and I just barely won at about 120km/h. Then he kept telling me how he didn't get a good start, here's how I started off the line. Revved to 4k RPM, as soon as the light went green I dumped the clutch and floored the gas changing gears as fast as I could at around 7000 rpm. My tires lost traction after about 10metres and I had to adjust my steering wheel left and right to keep the car straight. I could see him in my peripheral vision and in the end I beat him. Now are NA skylines really that slow that they can't even match a puny car like an old civic? I can't imagine what a drag against an integra type R or even an S would be like, totally smoking an NA skyline, how embarrassing.

In the car I also had my mate who weighed 80kG if that makes a difference?

Are NA skylines really that much of a heavy slow car that eats fuel and is shit at drags?

How would my car compare to other N/A cars in stock if it were identically skilled drivers?

Any thoughts please?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/
Share on other sites

  • Replies 165
  • Created
  • Last Reply

Top Posters In This Topic

Hi guys before you start telling me off about how illegal and dangerous and bad it is to do so, I'm just asking for some opinions and thoughts about my question, not the ethics behind it, thanks.

So tonight, I dragged my manual stock 99' R34 coupe against my mate's stock 97' ej8 Honda civic and barely beat him. He's running a 1.6L single cam engine, while I have a 2.5L twin cam rb25de....what amazes me is that he kept up and I just barely won at about 120km/h. Then he kept telling me how he didn't get a good start, here's how I started off the line. Revved to 4k RPM, as soon as the light went green I dumped the clutch and floored the gas changing gears as fast as I could at around 7000 rpm. My tires lost traction after about 10metres and I had to adjust my steering wheel left and right to keep the car straight. I could see him in my peripheral vision and in the end I beat him. Now are NA skylines really that slow that they can't even match a puny car like an old civic? I can't imagine what a drag against an integra type R or even an S would be like, totally smoking an NA skyline, how embarrassing.

In the car I also had my mate who weighed 80kG if that makes a difference?

Are NA skylines really that much of a heavy slow car that eats fuel and is shit at drags?

How would my car compare to other N/A cars in stock if it were identically skilled drivers?

Any thoughts please?

Thanks.

Your car is a shopping trolley..

Did you honestly think that because it has "Skyline GT" written on the back that it would be fast?

The DE Neo puts out what? 200hp at the crank...10 years ago...so maybe 170-180 now and weighs 1600kgs...not to mention the motor wouldnt have enough torque to pull a sailor off your sister.

As for hektic street drags yo! Against other NatAtmo cars....well being that a Ferrari Enzo is Aspirated, Porsche GT3 RS, 450hp HSV,s and FPV Falcons etc...how do you think you will go? Being that you could barely hold off an Old 1.6L Civic?

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786482
Share on other sites

Wow....not one swear word in that post and I havent had my morning coffee yet.....something is wrong.

BTW when you bought the car...did you do any reasearch? Did you look at the performance specs and see that the car has less power than a V6 Commodore and weighs the same or more? (than the earlier ones)

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786484
Share on other sites

You'd probably need 4kms of road to get up to that speed in an N/A Skyline. Did the "race" take what, atleast 15seconds+?

They are slow cars, dont be super street racer, there is no point when the old lady in an excel will fly past you

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786552
Share on other sites

Wow....not one swear word in that post and I havent had my morning coffee yet.....something is wrong.

BTW when you bought the car...did you do any reasearch? Did you look at the performance specs and see that the car has less power than a V6 Commodore and weighs the same or more? (than the earlier ones)

yeh i did i knew they were slow, but didn't think they'd be even slower than old civics

You'd probably need 4kms of road to get up to that speed in an N/A Skyline. Did the "race" take what, atleast 15seconds+?

They are slow cars, dont be super street racer, there is no point when the old lady in an excel will fly past you

no dude, i got to 120kmh ish in around 10 secs

its cause he had VTEC YO

lol

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786701
Share on other sites

So Much Fail

120kms in 10secs sounds about right. Well driven n/a R2/3/4 series skylines will do 0-100 in 8s give or take.

You should goto WSID with your mate and do it properly and then he can have no excuses either.

The gt-r is not really fat compared to other cars in it's league.

Your n/a skyline compares crap to other n/a cars on the road. An auto v6 commo will hold you off and anything remotely sporty will probably leave you behind (discounting faux sporty cars).

Lol you mention integra type r.. sorry but that will eat your car and spit it out before breakfast. Well driven, they can do 6's to 100 which actually would scare quite a few standard turbo cars from the same era.

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786737
Share on other sites

Your car is a shopping trolley..

Did you honestly think that because it has "Skyline GT" written on the back that it would be fast?

The DE Neo puts out what? 200hp at the crank...10 years ago...so maybe 170-180 now and weighs 1600kgs...not to mention the motor wouldnt have enough torque to pull a sailor off your sister.

As for hektic street drags yo! Against other NatAtmo cars....well being that a Ferrari Enzo is Aspirated, Porsche GT3 RS, 450hp HSV,s and FPV Falcons etc...how do you think you will go? Being that you could barely hold off an Old 1.6L Civic?

They weigh in around 1400KG's actually.

I didn't buy my 25GT for drags or w/e, I just like the look of them, it is my first car, but I have driven a GT-T as well as a 25GT (Duh) before and frankly they aren't THAT slow for NA standards.

Of course after I'm off my P's a GT-T or TT Supra will be replacing it, but that's 5 years from now.

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786749
Share on other sites

So Much Fail

120kms in 10secs sounds about right. Well driven n/a R2/3/4 series skylines will do 0-100 in 8s give or take.

You should goto WSID with your mate and do it properly and then he can have no excuses either.

The gt-r is not really fat compared to other cars in it's league.

Your n/a skyline compares crap to other n/a cars on the road. An auto v6 commo will hold you off and anything remotely sporty will probably leave you behind (discounting faux sporty cars).

Lol you mention integra type r.. sorry but that will eat your car and spit it out before breakfast. Well driven, they can do 6's to 100 which actually would scare quite a few standard turbo cars from the same era.

Thanks for the info man, bit disturbing though ah well...

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786752
Share on other sites

They weigh in around 1400KG's actually.

I didn't buy my 25GT for drags or w/e, I just like the look of them, it is my first car, but I have driven a GT-T as well as a 25GT (Duh) before and frankly they aren't THAT slow for NA standards.

Of course after I'm off my P's a GT-T or TT Supra will be replacing it, but that's 5 years from now.

+ Fluids + Driver + Passenger etc etc

and yes they ARE that slow for 6 Cylinder shopping trolleys

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786756
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...