Jump to content
SAU Community

Recommended Posts

Hi guys before you start telling me off about how illegal and dangerous and bad it is to do so, I'm just asking for some opinions and thoughts about my question, not the ethics behind it, thanks.

So tonight, I dragged my manual stock 99' R34 coupe against my mate's stock 97' ej8 Honda civic and barely beat him. He's running a 1.6L single cam engine, while I have a 2.5L twin cam rb25de....what amazes me is that he kept up and I just barely won at about 120km/h. Then he kept telling me how he didn't get a good start, here's how I started off the line. Revved to 4k RPM, as soon as the light went green I dumped the clutch and floored the gas changing gears as fast as I could at around 7000 rpm. My tires lost traction after about 10metres and I had to adjust my steering wheel left and right to keep the car straight. I could see him in my peripheral vision and in the end I beat him. Now are NA skylines really that slow that they can't even match a puny car like an old civic? I can't imagine what a drag against an integra type R or even an S would be like, totally smoking an NA skyline, how embarrassing.

In the car I also had my mate who weighed 80kG if that makes a difference?

Are NA skylines really that much of a heavy slow car that eats fuel and is shit at drags?

How would my car compare to other N/A cars in stock if it were identically skilled drivers?

Any thoughts please?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/
Share on other sites

  • Replies 165
  • Created
  • Last Reply

Top Posters In This Topic

Hi guys before you start telling me off about how illegal and dangerous and bad it is to do so, I'm just asking for some opinions and thoughts about my question, not the ethics behind it, thanks.

So tonight, I dragged my manual stock 99' R34 coupe against my mate's stock 97' ej8 Honda civic and barely beat him. He's running a 1.6L single cam engine, while I have a 2.5L twin cam rb25de....what amazes me is that he kept up and I just barely won at about 120km/h. Then he kept telling me how he didn't get a good start, here's how I started off the line. Revved to 4k RPM, as soon as the light went green I dumped the clutch and floored the gas changing gears as fast as I could at around 7000 rpm. My tires lost traction after about 10metres and I had to adjust my steering wheel left and right to keep the car straight. I could see him in my peripheral vision and in the end I beat him. Now are NA skylines really that slow that they can't even match a puny car like an old civic? I can't imagine what a drag against an integra type R or even an S would be like, totally smoking an NA skyline, how embarrassing.

In the car I also had my mate who weighed 80kG if that makes a difference?

Are NA skylines really that much of a heavy slow car that eats fuel and is shit at drags?

How would my car compare to other N/A cars in stock if it were identically skilled drivers?

Any thoughts please?

Thanks.

Your car is a shopping trolley..

Did you honestly think that because it has "Skyline GT" written on the back that it would be fast?

The DE Neo puts out what? 200hp at the crank...10 years ago...so maybe 170-180 now and weighs 1600kgs...not to mention the motor wouldnt have enough torque to pull a sailor off your sister.

As for hektic street drags yo! Against other NatAtmo cars....well being that a Ferrari Enzo is Aspirated, Porsche GT3 RS, 450hp HSV,s and FPV Falcons etc...how do you think you will go? Being that you could barely hold off an Old 1.6L Civic?

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786482
Share on other sites

Wow....not one swear word in that post and I havent had my morning coffee yet.....something is wrong.

BTW when you bought the car...did you do any reasearch? Did you look at the performance specs and see that the car has less power than a V6 Commodore and weighs the same or more? (than the earlier ones)

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786484
Share on other sites

You'd probably need 4kms of road to get up to that speed in an N/A Skyline. Did the "race" take what, atleast 15seconds+?

They are slow cars, dont be super street racer, there is no point when the old lady in an excel will fly past you

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786552
Share on other sites

Wow....not one swear word in that post and I havent had my morning coffee yet.....something is wrong.

BTW when you bought the car...did you do any reasearch? Did you look at the performance specs and see that the car has less power than a V6 Commodore and weighs the same or more? (than the earlier ones)

yeh i did i knew they were slow, but didn't think they'd be even slower than old civics

You'd probably need 4kms of road to get up to that speed in an N/A Skyline. Did the "race" take what, atleast 15seconds+?

They are slow cars, dont be super street racer, there is no point when the old lady in an excel will fly past you

no dude, i got to 120kmh ish in around 10 secs

its cause he had VTEC YO

lol

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786701
Share on other sites

So Much Fail

120kms in 10secs sounds about right. Well driven n/a R2/3/4 series skylines will do 0-100 in 8s give or take.

You should goto WSID with your mate and do it properly and then he can have no excuses either.

The gt-r is not really fat compared to other cars in it's league.

Your n/a skyline compares crap to other n/a cars on the road. An auto v6 commo will hold you off and anything remotely sporty will probably leave you behind (discounting faux sporty cars).

Lol you mention integra type r.. sorry but that will eat your car and spit it out before breakfast. Well driven, they can do 6's to 100 which actually would scare quite a few standard turbo cars from the same era.

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786737
Share on other sites

Your car is a shopping trolley..

Did you honestly think that because it has "Skyline GT" written on the back that it would be fast?

The DE Neo puts out what? 200hp at the crank...10 years ago...so maybe 170-180 now and weighs 1600kgs...not to mention the motor wouldnt have enough torque to pull a sailor off your sister.

As for hektic street drags yo! Against other NatAtmo cars....well being that a Ferrari Enzo is Aspirated, Porsche GT3 RS, 450hp HSV,s and FPV Falcons etc...how do you think you will go? Being that you could barely hold off an Old 1.6L Civic?

They weigh in around 1400KG's actually.

I didn't buy my 25GT for drags or w/e, I just like the look of them, it is my first car, but I have driven a GT-T as well as a 25GT (Duh) before and frankly they aren't THAT slow for NA standards.

Of course after I'm off my P's a GT-T or TT Supra will be replacing it, but that's 5 years from now.

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786749
Share on other sites

So Much Fail

120kms in 10secs sounds about right. Well driven n/a R2/3/4 series skylines will do 0-100 in 8s give or take.

You should goto WSID with your mate and do it properly and then he can have no excuses either.

The gt-r is not really fat compared to other cars in it's league.

Your n/a skyline compares crap to other n/a cars on the road. An auto v6 commo will hold you off and anything remotely sporty will probably leave you behind (discounting faux sporty cars).

Lol you mention integra type r.. sorry but that will eat your car and spit it out before breakfast. Well driven, they can do 6's to 100 which actually would scare quite a few standard turbo cars from the same era.

Thanks for the info man, bit disturbing though ah well...

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786752
Share on other sites

They weigh in around 1400KG's actually.

I didn't buy my 25GT for drags or w/e, I just like the look of them, it is my first car, but I have driven a GT-T as well as a 25GT (Duh) before and frankly they aren't THAT slow for NA standards.

Of course after I'm off my P's a GT-T or TT Supra will be replacing it, but that's 5 years from now.

+ Fluids + Driver + Passenger etc etc

and yes they ARE that slow for 6 Cylinder shopping trolleys

Link to comment
https://www.sau.com.au/forums/topic/362561-na-drag-race/#findComment-5786756
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...