Jump to content
SAU Community

Recommended Posts

Never had shoulder issues until doing MP, I avoid it, given the amount of people who comment similarly, I wonder if the body really likes that movement at all.

I did the movement for 9 years without issue; was probably the first exercise I ever did at the gym. Very important to start light though and don't go hero on it just because you can lift more - it probably needs flawless technique more than most exercises and your supporting muscles need time to build up too.

Start light...with an empty bar or broomstick if you have to. It's important that you have the flexibility and mobility to pull the movement off before you even consider putting a working weight on there. It doesn't take that long to get used to it; from my teaching of it, usually about 3-4 sessions before someone has a decent balance while pressing the bar overhead and maybe 8-9 before they develop the mobility to touch the bar on their neck (based on someone with poor mobility to begin with).

My 2c.

The seated version has advantages in terms of control/ isolation. Good if you are keen to work the shoulders for growth development and don't want to think too hard. Not so hard.

However, Standing press adds extra in terms of developing balance, core and suporting strength and requiring it.

People have no business really doing it without the following;

* proper thorasic spine extension . Can you extend properly? (wall slide tests on youtube)

* Scapular stablillity? (shoulder flexion test check it )

* Do you know how to brace your core

People don't learn to brace their core. This is an explanation might not be a good one.

Take a big breath of air into your belly and lock it there.

Your rib cage needs to be locked by contracting your abs.

Tighten/contract glutes

Raise up shoulders/ elbows to create a lat shelf , contract lats.

If you were taught by someone without covering these basics , then you were taught wrong. Thats before I'd explain the press.

Behind the neck press standing, is a characteristic of not having much clue with what I have seen in the past at gyms. Let alone picking the weight up off the dirt to do the movement. I won't say 'cleaning' the weight as it never looks anything like it.

Start light...with an empty bar or broomstick if you have to. It's important that you have the flexibility and mobility to pull the movement off before you even consider putting a working weight on there. It doesn't take that long to get used to it; from my teaching of it, usually about 3-4 sessions before someone has a decent balance while pressing the bar overhead and maybe 8-9 before they develop the mobility to touch the bar on their neck (based on someone with poor mobility to begin with).

This sounds like me, I do it and have sheit mobility slowly increasing my weight up and started off by not pushing myself too hard

I usually do a few sets of seated dumbbell shoulder press then move onto the standing barbell

Edited by UNR33L
  • 1 month later...

I'll have you know, I'm the owner of a fully fledged $120 Dunlop Mountain Bike I got from Big W... which I rode for maybe a month before my insistence on trying to ride everywhere in top gear saw me bend the sprocket on the rear gear set =\ Quality craftsmanship right there...

Also, I lost a bet in spectacular fashion when I failed to achieve 100km/h on the exercise bike digital speedo. The caliper/resistence system exploded and I launched off the bike around the 95km/h mark (I doubt it was accurate but it's a good story).

So I've got plenty of manly man bike experience.

Next you'll tell me you wear lycra shorts...

EDIT: Nice Dualie

Edited by ActionDan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...