Jump to content
SAU Community

Recommended Posts

ahh i did not know that!

id prefer nismo to be honest :P

Yeah for sure!

Having said that Nismo is made by Exedy, you buying an Exedy clutch does not mean you have a Nismo clutch.

As Exedy will make it to what Nismo's specifications.

I should have bought an Exedy or a Nismo Copper Mix, but I for now, I will get my Nissan OEM clutch rebuilt stronger.

NPC ftmfw...won't use anything else now. They made me a 10" organic (fits standard flywheel) rated to 300rwkw and it has less pedal effort than my cushion button had. Holding up beautifully @ 260rwkw. Best part is it was less than $600.

Enjoy your twin plates and buttons mofos!

NPC ftmfw...won't use anything else now. They made me a 10" organic (fits standard flywheel) rated to 300rwkw and it has less pedal effort than my cushion button had. Holding up beautifully @ 260rwkw. Best part is it was less than $600.

Enjoy your twin plates and buttons mofos!

I will

bought some new horns.

shit sounds f**ked up currently.

/randomflamin mongrel

I bought a horn expecting it to be loud as fark. But was disappointed

Cut off distributorship with GW, sorry mayne. Can probably get it from a GW retailer cheaper than you could have through me anyway.

Synx6000 seems fairly hard to locate stores that have it in stock. Tried Repco on centre road but no go. Might just go with my usual Motul 8100

NPC ftmfw...won't use anything else now. They made me a 10" organic (fits standard flywheel) rated to 300rwkw and it has less pedal effort than my cushion button had. Holding up beautifully @ 260rwkw. Best part is it was less than $600.

Enjoy your twin plates and buttons mofos!

I currently use a Xtreme Heavy Heavy duty organic clutch, recommended over Excedy when I got Sabbadin to do the work. Pedal feel is good and easy to drive. Cost about $650-700 from memory and holds 250-300rwkw i think

I bought a horn expecting it to be loud as fark. But was disappointed

Synx6000 seems fairly hard to locate stores that have it in stock. Tried Repco on centre road but no go. Might just go with my usual Motul 8100

I currently use a Xtreme Heavy Heavy duty organic clutch, recommended over Excedy when I got Sabbadin to do the work. Pedal feel is good and easy to drive. Cost about $650-700 from memory and holds 250-300rwkw i think

Lol is it the hella super tone or somethig? Anythings better than the crackly one I have now

Lol is it the hella super tone or somethig? Anythings better than the crackly one I have now

It was this one. 139db my ass.

http://www.ebay.com.au/itm/Stebel-Nautilus-CarStebel Nautilus Car Air Horn Kit Red 12 volt 139dB LOUD-2-Tone-Air-Horn-Black-Kit-12v-139dB-/25

Aaron has a dysfunctional horn.

Tony, if you can find it, give Syn-X-3000 a go...it's just a semi synth version of 6000 with a 10w40 grade. ~$25-$30 and will last ~5,000km instead of 10,000km like the full synth. Very good oil for the money.

Yeh this is what I have. I paid 43.50 or something my next door neighbour is a manager at hella lol he got em in for me at cost

so called lexus last week for a new gear knob since mine bit worn after 6 years.... $285! im like yehhh nah.

go on ebay lexus of miami in usa bought and delivered in under a week $140 landed.. what the ferk? not to mention the service was amazing constant updates on location departure / landing etc

sad state of affairs here in aus.

oh and i got a better gearknob then the one on offer here for 2 and a half times the price!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...