Jump to content
SAU Community

Recommended Posts

Is that the plate your getting ?

Don't answer my question with a question. I want answer man. NAO!

Also for reference... car is gonna be satin black with chrome meisters with mehbe Gold spokes... might end up with black spokes tho... depends if my mate can come through with powdercoating it gold.

well the plate is ghey (sorry brah :wub:) if it has to be though its black an gold all the way

NB: only if gold on rims otherwise its pointless having gold on the plate

Edited by alr33x

Ugh... gold is $100 more than white? WTF? $650 for a set of plates? I could buy a turbo upgrade kit from the US for that.

So don't even bother with the custom plates, just buy turbo kit!

Today's new purchases...

R230 Diff

Nismo RS521 LSD Disc Kit (12kgf/m)

Nissan Diff Side Seals... $5.33 each from Japan, vs $36 each from Brighton Nissan :|

*prays it all arrives and I can get it all together before deca* Single spinning with a shagged diff is no fun...

Today's new purchases...

R230 Diff

Nismo RS521 LSD Disc Kit (12kgf/m)

Nissan Diff Side Seals... $5.33 each from Japan, vs $36 each from Brighton Nissan :|

*prays it all arrives and I can get it all together before deca* Single spinning with a shagged diff is no fun...

PM me price brah

Im thinking of getting one as well

Speaking of number plates, are we able to just replace a single plate with the slimline one?

Just want a slimline for the front.

Yep, just ask vicroads to change a plate to slimline.

Tell me more about how you managed to fit DOUCHEBAG on a numberplate.

douchebag.

2h6t83b.png

Speaking of number plates, are we able to just replace a single plate with the slimline one?

Just want a slimline for the front.

I think you need to order a pair of slimlines so then have 2 full sets and just rock one of each.

Edit: Oh is that all Grant? I gotta get me one then!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...