Jump to content
SAU Community

Recommended Posts

If Judge Judy has taught me anything, its that stupid people somemtimes do stupid things with some kind of backstory.

Cousins aunties step-brothers mothers dog probably borrowed money a while back, or stepped on someones shoe or called someone a slag.

Anyway point is, if there was some sort of personal involvement or the victim recognised them from kindergarten or if it was some sort of vigilantism (sp) the news/police report isnt going to mention it.

Forced break-in of elderly lady? sure, probably pretty straight forward.

Man stabbed in a supposed mugging and the muggers not taking anything and then being caught within 24 hours? theres probably more to this.

This is a good point...

When a relative of mine was jailed, I couldn't believe how many media reports came out spruiking absolute bullshit - facts and statistics wrong; writing only one side of the story; changing words around to suit; misquoting etc. Completely lost faith in the mainstream media at that point. Focus seems to be on getting the story out there and grabbing attention rather than telling it how it is. Sensationalism defined.

Can do, are you gonna be running an aftermarket oil cooler though? If you are it might pay to delete the factory heat exchanger while the engine is out. NA heater hoses clean it up a lot under the plenum and gets rid of a heap of potential leak points.

So I see, no aftermarket oil cooler yet unfortunately :(

Where did you get that pic from? One of your jobs? Looks very less cluttered than my stock one

This is a good point...

When a relative of mine was jailed, I couldn't believe how many media reports came out spruiking absolute bullshit - facts and statistics wrong; writing only one side of the story; changing words around to suit; misquoting etc. Completely lost faith in the mainstream media at that point. Focus seems to be on getting the story out there and grabbing attention rather than telling it how it is. Sensationalism defined.

@@Birds

when we had a shooting near the club, the herald sun ran a FRONT PAGE article saying the shooting happened inside Hard Kandy. They included our name, logo, a photo of people on the dancefloor and a floor plan of the clubthat was complete with little stars showing where shots were fired and where the fight broke out.

the shooting was unrelated to HK and actually happened at the exford which is on the other side of the road and has nothing to du with HK. It also happened over 30 minutes after we kicked the group out of our club for being overly drunk and abusive.

still the herald sun just made up a headline grabbing story and there was nothing we could do as once the paper was run, the damage was done.

we contacted our lawyers (a HUGE international firm) and were told that there is no point pursuing it as the herald sun make a habit of doing this and has the means and finances to defend the issue for a lot longer than we do

cliffs notes: herald sun has no integrity and I would like release a pack of ebola monkeys into the building and lock the doors / windows

Here's the part #'s for R34 heater hoses, rad hoses, thermostat & heater core.

Upper Rad Hose - 21501-AA000
Lower Rad Hose - 21503-AA000
Heater Hose Core Upper - 92401-AA000
Heater Hose Core Lower - 92410-AA000
Metal heater hose piece on firewall - 92403-AA000
Heater hose upper - 92400-AA500
Heater hose lower - 92412-AA500
All The Hoses for the heat exchanger
14056-21U20
14053-21U10
14056-21U10
21307-21U20
21307-21U15
Thermostat - 21200-V7205
Heater Core assembly - 27140-15U00
If you have the opportunity to do an aftermarket oil cooler it would save a bunch of effort and be better for your engine in the long run, These are the parts needed for heat exchanger delete which then get rid of the upper and lower heater hoses and all the heat exchanger hoses as well.
Fitting between pressure sender and block - 25071-F6000
Front Heater hose - 92412-70T00
Rear heater hose - 92400-70T00
Threaded piece for oil filter - 15213-21001
Block fitting for Rear heater hose - 14075-75T00

@@Birds

when we had a shooting near the club, the herald sun ran a FRONT PAGE article saying the shooting happened inside Hard Kandy. They included our name, logo, a photo of people on the dancefloor and a floor plan of the clubthat was complete with little stars showing where shots were fired and where the fight broke out.

the shooting was unrelated to HK and actually happened at the exford which is on the other side of the road and has nothing to du with HK. It also happened over 30 minutes after we kicked the group out of our club for being overly drunk and abusive.

still the herald sun just made up a headline grabbing story and there was nothing we could do as once the paper was run, the damage was done.

we contacted our lawyers (a HUGE international firm) and were told that there is no point pursuing it as the herald sun make a habit of doing this and has the means and finances to defend the issue for a lot longer than we do

cliffs notes: herald sun has no integrity and I would like release a pack of ebola monkeys into the building and lock the doors / windows

All of them have no integrity as far as I'm concerned. The moment something becomes more about ratings and money than truth, corruption has a path. There's more to everything, which is why we're never in a good position to judge based on news alone. Even experts disagree!

A friend of mine did work experience and confirmed what we already knew: working for the herals sun requires selling your soul.

And unfortunately, I work with people who read the shit. I do know poeple who read it, just so they can point out all the errors and how misleading the stories are, which is almost just as bad.

Offloading responsibility onto others is quite possibly the best way to get through life without a hitch. I believe they teach courses on it, but they call it a diploma of management.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...