Jump to content
SAU Community

Recommended Posts

I remember reading somewhere that there was one of the gates belts which was perhaps a bit noisier than nissan oem?

Also, brahs know what the go is with coilovers and rwc? To my understanding most coilovers are illegal (even raised to legal height) because they don't have 2/3 of the travel required or something along those lines? But in reality, if it's the correct height, are they really adamant on this?

I remember reading somewhere that there was one of the gates belts which was perhaps a bit noisier than nissan oem?

Also, brahs know what the go is with coilovers and rwc? To my understanding most coilovers are illegal (even raised to legal height) because they don't have 2/3 of the travel required or something along those lines? But in reality, if it's the correct height, are they really adamant on this?

i got the racing belt for that extra peice of mind.....

all height adjustable coilovers are illegal i believe. am i wrong?

i got the racing belt for that extra peice of mind.....

all height adjustable coilovers are illegal i believe. am i wrong?

Sort of...

There's are some approved coil overs, they need to be able to travel a certain distance in damper or something, they can't be too stiff. And they can't allow the car to go lower than legal limit..

Pedders do Aus legal adjustable coil overs

I remember reading somewhere that there was one of the gates belts which was perhaps a bit noisier than nissan oem?

Also, brahs know what the go is with coilovers and rwc? To my understanding most coilovers are illegal (even raised to legal height) because they don't have 2/3 of the travel required or something along those lines? But in reality, if it's the correct height, are they really adamant on this?

i bought a gates belt and racepace told me it would be pretty noisy and advised me to stick with a standard belt with HKS cams - might try out the gates though next time as noise wont really bother me that much i guess, just hate in-car squeaks and rattles!

Yup, must have been the Racing belt, then. When I did my major service, I just went with Nissan OEM though :D.

--------------

Re: Coilovers, that's pretty much in-line with my understanding, then. However, my question was (even with the new photos etc for RWC) if it's a big issue, provided it's sitting at legal height...

Have the car booked in for alignment etc at Traction tomorrow, but seems a bit of a waste if I'll have to take them out to get RWC anytime soon... that's all...

anybody got any sports store hook ups south east, need some indoor soccer shoes short notice

You dont need shoes

Your the tits brah

is this you Platts when you play soccer?

https://www.facebook.com/photo.php?v=536824339705766

You dont need shoes

Your the tits brah

is this you Platts when you play soccer?

https://www.facebook.com/photo.php?v=536824339705766

brilliant! thats me with added fat suit. except fat suit is real. :unsure:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...