Jump to content
SAU Community

Recommended Posts

Interesting - though I don't know I want to do it myself

its easy mate. electric spray gun from bunnings for 50 bucks. thinners a mixxing stick and a mixxing jug. about 5-6 coats should be enough...

infact i dont even think you need thinners.

its easy mate. electric spray gun from bunnings for 50 bucks. thinners a mixxing stick and a mixxing jug. about 5-6 coats should be enough...

infact i dont even think you need thinners.

It's more the crappy conditions I have - carport with a dirt floor

It's more the crappy conditions I have - carport with a dirt floor

get an old blanket, roll car on it. paint wheels on the car. just spend time prepping. its realllly easy man. and the guns they sell are pretty good. dont throw paint everytwhere.

well. for one though, i have nfi how much it is to just freight car over to tassie. Would be heaps easier to freight car over, fly over, collect car, drive around, freight car back, and then fly back. Sure you'll be left with no car for awhile, but really, launceston and hobart are pretty small. Walkable if you ask me.

Though. Due to time constraints, wasn't able to sample some hervey bay scallops and lobsters. =(

it is

255 for a 9, 295 for a 10.

you can go less, tyres have a few different sized wheels they can fit, to be legal the load rating must be correct. But as I said you can put a 225 on a 9" legally

Put a Do Luck kit on it and leave the suspension stock too.

LOL!!!

make sure it's got heaps of power too so it's a really dangerous car to drive

235 on a 9 is usually a stretch, but perfectly drivable and legal. A 245 is a very slight stretch; 255 is a flat wall; 265 a very slight bubble. But it changes from tyre to tyre too, as I have seen some 235 that appear as wide as 255 and vice versa.

You really gotta look at the tyre manufacturer's website to see what range they recommend putting their tyre sizes on.

235 on a 9 is usually a stretch, but perfectly drivable and legal. A 245 is a very slight stretch; 255 is a flat wall; 265 a very slight bubble. But it changes from tyre to tyre too, as I have seen some 235 that appear as wide as 255 and vice versa.

You really gotta look at the tyre manufacturer's website to see what range they recommend putting their tyre sizes on.

Iv got 265's on 10.5inch wheels, very little stretch. But as you said depending on manufacturer as advan 265 ad08 appear much wider than the khumo 265 I replaced, the profile appears different too even tho dimensions are identical.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...