Jump to content
SAU Community

Recommended Posts

out at morwell today and had no idea the smoke was so bad from the coal fire going on. you can see the ash in the air, it's building up on the cars. I don't know how the EPA deems it ok to be outside for extended periods.

epa dont know about it.

too busy sending out letters to car drivers.

  • Like 1

sorry to hear. didnt think JZ would be your thing

jay-z.jpg?w=680

Celsior or cressida with 1UZ is where its at for toyotas. JZ's too pricey.

you know big engine toyotas Alvin, what you think?

as mentioned, they're smooth and all, but they lack everything else, power, torque, and are put in cars too heavy for them.

needs turbro in the boot. coolant/radiator set up in the 1uz snorer is stupid, things are overly complicated.

just go 1J.

out at morwell today and had no idea the smoke was so bad from the coal fire going on. you can see the ash in the air, it's building up on the cars. I don't know how the EPA deems it ok to be outside for extended periods.

They issued advice to residents to consider evacuating today apparently due to the air quality (or lack thereof) as they can't guarantee how much longer it'll be like that.

sooo... 892kms on the hilux and it decides to run out of fuel.

stoopid gauge design... ill take a pic later. The needle and lines are misleading. its a terrible dash in general. instead of lines representing 60km/h, 80, 100 etc, it has a solid line all the way round then gaps missing on the 60, 80, 100 marks. actually makes it difficult to gauge if youre under or over speed limit. and of course their lever design reads 500kms in first half of tank and 400 on the second half. f**king toyotas.

sooo... 892kms on the hilux and it decides to run out of fuel.

stoopid gauge design... ill take a pic later. The needle and lines are misleading. its a terrible dash in general. instead of lines representing 60km/h, 80, 100 etc, it has a solid line all the way round then gaps missing on the 60, 80, 100 marks. actually makes it difficult to gauge if youre under or over speed limit. and of course their lever design reads 500kms in first half of tank and 400 on the second half. f**king toyotas.

Aw, poor you.

sooo... 892kms on the hilux and it decides to run out of fuel.

stoopid gauge design... ill take a pic later. The needle and lines are misleading. its a terrible dash in general. instead of lines representing 60km/h, 80, 100 etc, it has a solid line all the way round then gaps missing on the 60, 80, 100 marks. actually makes it difficult to gauge if youre under or over speed limit. and of course their lever design reads 500kms in first half of tank and 400 on the second half. f**king toyotas.

Get a pulsar

How many kw can a R33 GT-R fuel pump support in my gts-t? Ceebs going 040...

I've seen them pump out enough fuel to support 450rwkw in a GTR. I've also seen them run out of puff at 330rwkw. Luck of the draw really but will be more than you need.

I've seen them pump out enough fuel to support 450rwkw in a GTR. I've also seen them run out of puff at 330rwkw. Luck of the draw really but will be more than you need.

How much voltage they're receiving is a huge factor in the flow rate (and I'm sure km's also could be a factor)... Wire it up using a relay to get full voltage instead of 15yo thin wiring designed for a smaller pump and you'll be laughing.

  • Like 1

I spy a Simon

attachicon.gif20140226_182819.jpg

Oh hai... Was on my way to the SAUVIC AGM, which was only 10 minutes from here.... or 1 minute if I had turned left instead of right at this intersection.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...