Jump to content
SAU Community

Recommended Posts

NZ is quality, to just drive around and relax and do nothing. I did a bit of a road trip around both islands. It was nice.

It really is a nicer version of Australia, so going there is just... nice. In a good way. Everything is... nice.

also, nice.

Big fan of Vietnam and Cambodia, especially the way less travelled bits. You'd want more than a week though, as getting to these areas involve 5-8 hour bus/train adventures which given you'd have to come back, would really eat into your time.

go to the deep north of canada aye.

fecking bootiful. and cold. and amazing. go fishing near the rockys after the melt. go horse back riding thru the ranges. squirt pepper spray at bears to get them to f**k off. go swimming in a crystal clear lake of glacier water, then go glacier walking!

alberta. most beautiful place on the planet. besides alaska. but the people are nicer in canada.

  • Like 1

Better food than USA as well

Kinda scary seeing a beer just wander out of the trees tho

even scarier when your taking a shit, see a bear and realise your rifle and pepper spray are on the horse that is having a heart attack.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...