Jump to content
SAU Community

Recommended Posts

What is the best option for side feed injectors that are e85 friendly? Reluctant to convert to top feed at this stage

My car just turned 18 so can legally drink alcohol now

I thought you were selling your car Ric?

There are a few reasons not to go E85...

The need for Jerrycans is one of the major ones since not a lot of regional centres have any E85 at all, so driving to Winton or DECA will use nearly a tank, then the track day, then the drive home...

I do 300+ peak hour km's each week in my car, I could easily switch to E85 (My pump can handle it, and my injectors are 550's... might need an upsize if I want to keep some decent overhead, I pass a few petrol stations with it each day), but its still the hassle of country trips which suck.

I'll do it in the future, but for now, I'm sticking to BP98

Haha yeah

I haven't got Flex fuel tune at the moment, so any long road trips I need to look at e85 stations.

Wifey prob thinks Im a weirdo carrying a jerry can everytime we go somewhere far

I thought you were selling your car Ric?

Haha yeah

I haven't got Flex fuel tune at the moment, so any long road trips I need to look at e85 stations.

Wifey prob thinks Im a weirdo carrying a jerry can everytime we go somewhere far

I'm expecting to love it too much to sell it when I get it back all shiny and new. Driving a rental corolla atm and not having powah is driving me mental haha

Who cares what wifey thinks, she's stuck with you now

What is the best option for side feed injectors that are e85 friendly? Reluctant to convert to top feed at this stage

My car just turned 18 so can legally drink alcohol now

There are only two e85 compatible injectors on the market I could recommend, ID1300 and Xspurt 1400. Both are 14mm top feed. Other sizes seem to handle it, like the other Bosch sourced Xspurts, but they weren't designed for long term ethanol use.

I can supply up to 550cc in sidefeed injectors, anything larger is generally a drilled highflow. (with the exception of Nismo 750's I think) You can generally buy a top feed conversion kit and the 14mm injectors cheaper than a set of sidefeeds too.

Top feed is an easy conversion, there are plenty of kits available to swap to top feeds on the RB25, and the RB25 Neo engine comes with them stock so it doesn't look out of place. A few have used the Neo rail on the older engine to keep the stock look.

Shit excuse, Simon. E85 conversion need not be permanent.

I've done the country trip on ethanol before, you just need to fill back up with 98 when the tank gets below 10 litres and switch to your heartily rich 98 tune that will run it fine.

As for DECA, if I wanted to do it I'd just switch back to 98 and drive up there on that, then do the event on that. If I wanted to do it on ethanol, it would take a little planning but I'd drive up on 98 with a couple gerrys of ethanol and swap it in when the 98 was low enough. Then same as above when coming home and stopped at a servo with 98.

What is the best option for side feed injectors that are e85 friendly? Reluctant to convert to top feed at this stage

My car just turned 18 so can legally drink alcohol now

Adding to Scotty's post, I've never had an issue with my Nismo 555s.

I remember reading a post that Trent made when he was first getting serious about Flex tuning and he was saying that it was taking 2-3 full tanks before the sensor was actually reading anything close to the pure/drained tank E85 figures.

I remember reading a post that Trent made when he was first getting serious about Flex tuning and he was saying that it was taking 2-3 full tanks before the sensor was actually reading anything close to the pure/drained tank E85 figures.

This is true, but a good tuner won't be knife edging it to a certain percentage and you'll have no issues switching from <10 litres of 98 and vice versa. There's plenty of tolerance in a good tune, enough that I've been able to give my car stick after switching without issue. So my E85 tune isn't radical up top, but I still have an extra 40rwkw in the midrange to muck around with.

Some of the guys in the ethanol thread tried to tell me that my E85 tuned engine was going to detonate from accidentally copping a tank of 70% lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...