Jump to content
SAU Community

Recommended Posts

Have a few here and play every now and then, ninja mode is built in my blood.

And buy one of these for 10,000 dong

jianzi.gif

Then kick it around like hacky sack with some local kids, they are all fking ninjas at this shit, even their parents

You bitches coming along to the SAU Christmas Drinks on the 20th of Dec at the st kilda rd Belgium beer cafe (or whatever its called now)

Will be a good day/night... Clear your schedules, make it happen, stop being bitches!

mebe, taking the wife to airport just not sure what time the flight is

Very Mixed reviews... should be just fine for that...

Micolour is the SAU VIC sponsor and one of the best in Melbourne however...

Tony had his car sprayed at DT and it turned out pretty sex.

Tony can speak Vu though

The rest of us will get shafted :P

But yeah plus 1 for mixed reviews have heard good and bad but I'll prolly end up chancing it when I respray mine because 20 year old car

Vu himself says he sprays accordingly with your budget - if you want a $7000 job it will look $7000, if you want a $3000 job he will do that too but don't expect it to look like a Continental GT

Fkin uncle

  • Like 3

if i wanted a 3 tonne land barge i probably would get a nissan patrol or something.

however if i wanted a sub-2 tonne land yacht (and i did) i got the gloria currently sitting in my driveway :D looking dirty like its on its way to Naru detention centre. straight off the boat.

10819032_10204093802978551_399578310_n_z

took my friends 10mins to work out where the button for the fuel cap is. lolz.

  • Like 2
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...