Jump to content
SAU Community

Recommended Posts

Walk out to car to find right rear AD08R nearly flat

Either fast leak or dodgy neighborhood fkin with my property again

Lose lose for Birds

one of my AD08R's deflated unnaturally quickly. other 3 were fine. was in a backyard, so no one had touched the car.

That's some Greg shit right there

Did it do it again or a one off?

Fitting AD08's to my car right now

Got told the fronts (Michelin Pilot sport 3's) are a horrible match and almost certainly will result in me binning the car

Greg issues occurring before even using them now

Widths of Front vs Rear?

I wouldn't say the tyre itself is a horrible match... your fronts aren't hardly 215 Chinese tyres... Unless the tyre place thinks you're going to be tracking it... in which case I'd be recommending AD08R's on the front as well or the rears will just push you off the track in a greg level understeer.

Coming from 245/275 Nitto NT05's

235/265 now

Pilot Sport 3 fronts, AD08 rears.

Did say I may track it, but he was more concerned i'd bin it driving in normal traffic or highway cruising.

All tyres involved were a great deal, etc.

Figured it'd be fine, if anything the PS3's should be more grippy than the AD08's, hence them being on the front of the car.

But yeah. Slip angles apparently very different, told to take EXTREME caution, and I'd notice it within 5kms of driving the car if its gonna be a problem.

I have AD08R 265 on the rear and AD08 255 on the front

It doesn't understeer really, in spite of the fronts being a street version of the rear semis

Actually is quite balanced feeling

I also postulate that the rears will wear down faster and return to a slight oversteer

I have AD08R 265 on the rear and AD08 255 on the front

It doesn't understeer really, in spite of the fronts being a street version of the rear street tyres

Actually is quite balanced feeling

I also postulate that the rears will wear down faster and return to a slight oversteer

fixed that up for you...

  • Like 1
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...