Jump to content
SAU Community

Recommended Posts

AWSOME effort Gav.

500 RWKW! GT-RS who, what, where? :nyaanyaa:

One thing you have not mentioned is comp surge. Does it have any? Please say no!

What compression ratio is your 2.8?

:worship: :worship:

Paul

Absolutely no compressor surge. These are like the GT-RS terbs top end with the 2530 bottom end response.

The final max HP figure on E85 was at 26 to 27 psi.

I can't help wondering what the GTX2860R units would be like north of 30 psi :dry:

For the other question of comp ratio - standard HKS Step 2 kit so should be 8.7:1.

My engine has now seen 4 hard seasons of motorsport so when it's time for a rebuild it's custom pistons to 88mm in a sleeved block with a 9:1 (or higher)comp ratio.

Funny thing is, your RS's were not making this peak figure. The RS's 'felt' faster because it didn't make it's power to so much later. Haha.

It's fantastic that there is no surge!!!! When will you do a 'hero' run to show what these babies can do?

The 60 mm versions would be interesting. Come on sooner with a tad more top end over the normal 5's?

How do they sound?

I found a big difference between RS's and the 5's. Are these different again?

Hmmmm.....bit difficult to say as the induction piping and air cleaners are changed. My guess is that they are quieter. Was a bit busy trying to keep the car on the black stuff today :-)

Hey gav, can you please confirm your diff ratio and tire size? i'd like to plot your tq curve with rpm

it looks like you have about 504 ftlbs at 3800 rpm at 23psi on bp98. oh my.

Edited by black bnr32

Hey gav, can you please confirm your diff ratio and tire size? i'd like to plot your tq curve with rpm

it looks like you have about 504 ftlbs at 3800 rpm at 23psi on bp98. oh my.

GTS4 diffs = 4.375

265/35x18 tyres = 641mm diameter

Thanks!

It doesn't hang around does it!

Love the idle at 2.05 too

Never seen an Evo trying to be a Zebra before either haha

It is an amazing car, 2.4L, GT42 turbo, sequential dogbox, massive euro brake package, carbonfibre everything $$$$ the Zebra that is..

Edited by tricstar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...