Jump to content
SAU Community

Recommended Posts

AD08R's are miles ahead of KU36's, very impressed with them.

Tried to source a set of 235/40/17 AD08R's, but no luck whatsoever as they're out of stock nationally and the ETA for the next batch is 'unknown'.

Then tried to source some Toyo R888's instead, but no luck as none in stock nationally and none on order.

So it looks like im even gonna have to source my farkkkinn tyres direct from Japan.

my take on these street-track crossover tyres is that anything that costs as much as cheaper semis is pointless - buy the semis! So for me that rules out AD08, RS3 and R1R. If you really have to have the fastest tyre over 120 UTQG reagardless, WTAC pre-control tyres pretty much proved its the RS3. And they should be cheaper than AD08 too.

Otherwise that basically leaves the choices down to KU36, RSR and 123S if you're looking for something cheaper than semis that will do an OK job on the track and road..

RSR are the fastest of the rest but wear out so quickly that buying semis works out to be better value.

KU36 - I've had these on a Supra and Legnum. They do respectable times and can cop an absolute flogging. They were quiet on the Supra but noisey on the Legnum. They were good in the wet imo, but many disagree with that. 180 treadwear. These lasted as long as normal road tyres on my Supra and did heaps of track days locally and interstate. I wouldn't hesitate to buy these again.

123S - all i really know is the Excel racers do pretty respectable times on them. 200 treadwear and very deep tread - might be a bit squirmy at first but they should last pretty well. Sidewalls seem nice and stiff too. I just put a set of these on my Datto yesterday. The main reasons I chose these over KU36 was that he had them in stock and gave me a pretty sharp price on them.

Car is set up for R comps which are used for proper track days and will stay that way. Don't want to get a wheel alignment every time I change tyres so will live with the less than optimum setup for the roadies.

AD08R's are miles ahead of KU36's, very impressed with them.

ok let's do the exercise step by step. My Soarer needs new rear tyres: 265/35 R18

Yokohama AD08R $467ea

Hankook RS3 $ ?? couldn't find a price, but even the Z221 semi is $479 - a whopping $12 more than AD08R!

Kumho KU36 $225ea

Nitton NT05 $220ea

Achillies 123S $195ea

Federal RSR $190ea

Nankang NS2R $179ea

one of these things is not like the others!

It's good to hear they're miles ahead of the KU36. They'd bloody well want to be - they're more than double the price! You're paying full on semi-slick money for them. Why not just buy semis? Semis won't last a whole lot less using them on the road. Here's a couple that are way cheaper than AD08R

R888 265/35 $380ea

NT01 275/35 $280ea

The only reason I can see to buy AD08R is if you are competing in Superlap Clubsprint class.

One thing to consider is that there are people claiming to have done 12 track days and 5,000km on the street on AD08Rs. Certainly not possible to get that sort of economy out of A050s

I actually got around 18days over 2 years and +15,000km on a silvia running 235/45/17. The replacements were $300pc fitted/balanced and unlike Harry, other road tyres weren't that much cheaper whereas decent semis were quite a bit more, only r888 came in at that price.

fair enough if you can get them for a similar price as other crossover tyres, or if you're in an event/series that requires these sort of things. I guess with more events having street tyre classes these days it's kinda changing the equation a bit - if you want to be competitive, you buy the best tyres allowed regardless of cost.

18 track days is pretty impressive life! My old Supra got 12 track days and 15,000km on KU36s before the rears wore out, and I thought that was good...

ok let's do the exercise step by step. My Soarer needs new rear tyres: 265/35 R18

Yokohama AD08R $467ea

Hankook RS3 $ ?? couldn't find a price, but even the Z221 semi is $479 - a whopping $12 more than AD08R!

Kumho KU36 $225ea

Nitton NT05 $220ea

Achillies 123S $195ea

Federal RSR $190ea

Nankang NS2R $179ea

one of these things is not like the others!

It's good to hear they're miles ahead of the KU36. They'd bloody well want to be - they're more than double the price! You're paying full on semi-slick money for them. Why not just buy semis? Semis won't last a whole lot less using them on the road. Here's a couple that are way cheaper than AD08R

R888 265/35 $380ea

NT01 275/35 $280ea

The only reason I can see to buy AD08R is if you are competing in Superlap Clubsprint class.

Hey mate,

Not sure if you tried Traction Tyres, but I got AD08R's in the same size for 380 (think it was actually 365...can look at the receipt if u want), a couple of months ago.

I was quoted 430 for 285/30/18.

  • 4 weeks later...

about to give a few options a try

r888 were shit but consistently shit

just put a set of ao50m's on so will let ya know how they go compared to the 888's is expect them to be awesome for a lap then f**k out with the gtrs weight

then will review against a set of c70's

TAlking about AD08s and RS3s in this thread?

They aren't semi slicks / r-compounds at all!

Nobody said they were. In fact, the discussion started with someone saying he already had R-comps but wanted some S-comps for driving to events about 400km away and as a road tyre iirc.

Edited by hrd-hr30

No argument there, but a circuit capable tyre for less than half the cost of most r-compounds is worth mentioning.

Haha just having a stir :)

Nitto NT05 pricing outta Taleb is almost the best value atm IMO. My set of 20" is like 1,100... Now that is cheap.

  • 4 weeks later...

well tried the hankcock c70, i bought 6 295/45/18 for 500

some were pretty thrashed

compared to the new r888's i had on they were epic

almost hit the first water filled barrier on the track because when i turned the steering wheel the car tunred

scared the shit out of me

easily held 10km/h higher speeds mid corner

would band again

i am guessing if you bought new one they would be ever better

well tried the hankcock c70, i bought 6 295/45/18 for 500

some were pretty thrashed

compared to the new r888's i had on they were epic

almost hit the first water filled barrier on the track because when i turned the steering wheel the car tunred

scared the shit out of me

easily held 10km/h higher speeds mid corner

would band again

i am guessing if you bought new one they would be ever better

You talking about the soft compound Z221 - the C7?

How are they relative to the A050's?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...