Jump to content
SAU Community

Recommended Posts

What about Hankook Z221's, not the two groove ones. Only available in 17 and 18" but three compounds listed. For sprints I'd be tempted to try the softs.

Neil used them on the weekend at Bathurst and found they worked better than the Avon softs (that cost $200ea more). There's a reason they were banned from superlap

I thought Neil's Avon's were supposed to be the best thing since sliced bread with their special break in process.

If Neil is happy with the Hankook offering compared to the Avon's then they would be a great tyre for the money considering that they are hundreds of dollars cheaper each.

What about Hankook Z221's, not the two groove ones. Only available in 17 and 18" but three compounds listed. For sprints I'd be tempted to try the softs.

Go back to page 18 and read my post about them. Cliffs: Great when new, but the soft compound only last a handful of track days. Admittedly, I am hard on tyres, and the car is no featherweight...

Edited by hrd-hr30

Go back to page 18 and read my post about them. Cliffs: Great when new, but the soft compound only last a handful of track days. Admittedly, I am hard on tyres, and the car is no featherweight...

If yours were softs then on your heavyweight and in hot weather that's asking a bit much don't you think Harry? I was thinking mediums for mine which is several 100kg lighter, something like 255 rear, 235 front tyres.

Richard: "For sprints I'd be tempted to try the softs"

Harry: softs don't last long

Richard: "softs were asking a bit much don't you think Harry... I was thinking mediums..."

Harry: :/ uh, glad I could help?

lol Yes Harry, instead of waffing around I should have come right out with it and said that the Hankook softs on your unsophisticated heavyweight very likely overheated and so were cactus from then on which was hardly the tyres fault. For me, being tempted to use softs is a bit different to thinking mediums which obviously is the safer option.

The hottest conditions I used them in was at Morgan Park at about 34degrees ambient. They showed no signs of overheating on the day - grip never dropped off like it would if they got too hot, and they still went well at a hillclimb and Phillip Island after that, so I don't think "they overheated and were cactus from then on".

There is no chance the hillclimb overheated them. It was nice and cool at Phillip Island and they were great down there too. Not only did grip not drop off in any session as it would if they got too hot, but I did my best lap on the last lap of the day. Next time I used them they were instantly horrible and got worse with each lap. They just lived their life-span of heat cycles if you ask me.

lol at someone running pogo stick and horrible multi-link rear suspension calling the Soarer's double wishbones unsophisticated!

Edited by hrd-hr30

Double wishbone suspension eh, like the old Holdens used to have up front. You are on a winner there Harry :no:

Anyway tyres. MP, depending on which circuit, can be a bit hard on tyres, all those sharp corners. And I have no idea if overheated tyres go off straight away or just can have their life shortened. Must check that out.

  • 3 weeks later...

Semi related (pun) to this thread – what would you guys recommend running for a hill climb?

I've signed up for the Haunted Hills intro next month and have the following options:

  • Street rims: Kumho KU36 (UTQC 180)
  • Track rims: Toyo R888R (UTQC 100)

I'm guessing it might be hard to get enough heat into the Toyos to be effective on short runs...?

  • 5 weeks later...

As an experienced hillclimber, the semi (even the R888) will always be better than the KU36.

Thanks for the tip Harry, exactly what I did.

I'm really liking the R888R, even in my skinny 225/45ZR17 square setup. Very communicative and plenty of warning before they let go, in a progressive way.

I'm new to semis so can only compare to street tyres, but still definitely recommended.

yep, that's where I found them. My set arrived today. 265/35 R18 for the Soarer, so it will be a direct comparison vs:

245/40 Nitto NT01 - 1:01.3 Lakeside

235/40 Hankook Z221 - 0:59.8 Lakeside

post-15659-0-79973200-1463119625_thumb.jpg

Edited by hrd-hr30

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...