Jump to content
SAU Community

Recommended Posts

Probably not far over, if at all or ever but it made sense to me to future proof it while it was being done.

I wanted something reliable so my concept was build it for like 500+ or something and I could maybe expect it to last a bit at 80 or so % of its capabilities as I wanna be able to rack up some laps.

Made sense in my head :)

Wiring is in progress and will be finished by Tuesday next week, going to need some heavy duty straps to hold this thing back from jumping off the dyno seriously.

No PRP brace on this build, we have followed the laws of physics not marketing hype. 

Don't fancy redrilling/replaneing that thing to suit anyway. No CDM parts on my car, only JDM & USADM

I think it will be hard for the car NOT to make 300kw , gate springs are 14psi and I expect this is the figure I'll be getting. 

I mean, obviously, the head is akin to a Mario Rossi daytona 305ci head & this is what happens.....make big power easily. 

Moreover, I think the thing I'm most excited about is the sound....a big valve head with a big bore no nonsense exhaust. One rear muffler only, can't disturb the exhaust gas when I'm on the limit...but I can disturb the neighbours within a 3 block radius honestly. It's going to sound like a peripheral port 3 rotor, I've done the maths.

Cheers,

Benny "The Don".

 

  • Haha 1

  Nice, I imagine a reasonable middle of the road strap on (for general home use  would have a strong enough strap to hold it to the dyno, but good to hear you are also over thinking that.

 

Mario rosi daytona head is also NASA spec? Just trying to keep up.

Can you share the maths for calculating what the exhaust will sound like?

16 minutes ago, Ben C34 said:

  Nice, I imagine a reasonable middle of the road strap on (for general home use  would have a strong enough strap to hold it to the dyno, but good to hear you are also over thinking that.

 

Mario rosi daytona head is also NASA spec? Just trying to keep up.

Can you share the maths for calculating what the exhaust will sound like?

Basically yes....and I've done it all without sponsors.

As for the sound...its all about the wastegates merge, 2 into 1 then into the main pipe, will make it sound like a 3 rotor. 

Will be serious velocity, I told the tuner to make sure I'm spitting 6 foot flames like the Brill Steel S15.

  • Like 1
4 hours ago, BakemonoRicer said:

Wiring is in progress and will be finished by Tuesday next week, going to need some heavy duty straps to hold this thing back from jumping off the dyno seriously.

No PRP brace on this build, we have followed the laws of physics not marketing hype. 

Don't fancy redrilling/replaneing that thing to suit anyway. No CDM parts on my car, only JDM & USADM

I think it will be hard for the car to make 300kw because my gearbox can not hold stock turbo power , gate springs are 14psi and I expect this is the final boost pressure needed to turn my gearbox into marbles.

I mean, obviously, the head is akin to a Mario Rossi daytona 305ci head & this is what happens.....make big power easily. 

Moreover, I think the thing I'm most excited about is the sound....a big valve head with a big bore no nonsense exhaust. One rear muffler only, can't disturb the exhaust gas when I'm on the limit...but I can disturb the neighbours within a 3 block radius honestly. It's going to sound like a peripheral port John Deere, I've done the maths.

Cheers,

Benny "The Dong".

 

FYP brah ?

  • Haha 2
11 hours ago, BakemonoRicer said:

No PRP brace on this build, we have followed the laws of physics not marketing hype. 

 

Haha well to be fair, I'm not sure PRP were trying to market towards the 240kw SR's with those braces... 

Is this your car?

https://www.gumtree.com.au/s-ad/wahroonga/cars-vans-utes/2002-nissan-s15-200sx/1251512935

I guess I was wrong with the Samsonas and the power, but 506kW was close enough.

image.png.7955f677222e9705a65d51c5dbb47d5a.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...