Jump to content
SAU Community

Recommended Posts

Probably not far over, if at all or ever but it made sense to me to future proof it while it was being done.

I wanted something reliable so my concept was build it for like 500+ or something and I could maybe expect it to last a bit at 80 or so % of its capabilities as I wanna be able to rack up some laps.

Made sense in my head :)

Wiring is in progress and will be finished by Tuesday next week, going to need some heavy duty straps to hold this thing back from jumping off the dyno seriously.

No PRP brace on this build, we have followed the laws of physics not marketing hype. 

Don't fancy redrilling/replaneing that thing to suit anyway. No CDM parts on my car, only JDM & USADM

I think it will be hard for the car NOT to make 300kw , gate springs are 14psi and I expect this is the figure I'll be getting. 

I mean, obviously, the head is akin to a Mario Rossi daytona 305ci head & this is what happens.....make big power easily. 

Moreover, I think the thing I'm most excited about is the sound....a big valve head with a big bore no nonsense exhaust. One rear muffler only, can't disturb the exhaust gas when I'm on the limit...but I can disturb the neighbours within a 3 block radius honestly. It's going to sound like a peripheral port 3 rotor, I've done the maths.

Cheers,

Benny "The Don".

 

  • Haha 1

  Nice, I imagine a reasonable middle of the road strap on (for general home use  would have a strong enough strap to hold it to the dyno, but good to hear you are also over thinking that.

 

Mario rosi daytona head is also NASA spec? Just trying to keep up.

Can you share the maths for calculating what the exhaust will sound like?

16 minutes ago, Ben C34 said:

  Nice, I imagine a reasonable middle of the road strap on (for general home use  would have a strong enough strap to hold it to the dyno, but good to hear you are also over thinking that.

 

Mario rosi daytona head is also NASA spec? Just trying to keep up.

Can you share the maths for calculating what the exhaust will sound like?

Basically yes....and I've done it all without sponsors.

As for the sound...its all about the wastegates merge, 2 into 1 then into the main pipe, will make it sound like a 3 rotor. 

Will be serious velocity, I told the tuner to make sure I'm spitting 6 foot flames like the Brill Steel S15.

  • Like 1
4 hours ago, BakemonoRicer said:

Wiring is in progress and will be finished by Tuesday next week, going to need some heavy duty straps to hold this thing back from jumping off the dyno seriously.

No PRP brace on this build, we have followed the laws of physics not marketing hype. 

Don't fancy redrilling/replaneing that thing to suit anyway. No CDM parts on my car, only JDM & USADM

I think it will be hard for the car to make 300kw because my gearbox can not hold stock turbo power , gate springs are 14psi and I expect this is the final boost pressure needed to turn my gearbox into marbles.

I mean, obviously, the head is akin to a Mario Rossi daytona 305ci head & this is what happens.....make big power easily. 

Moreover, I think the thing I'm most excited about is the sound....a big valve head with a big bore no nonsense exhaust. One rear muffler only, can't disturb the exhaust gas when I'm on the limit...but I can disturb the neighbours within a 3 block radius honestly. It's going to sound like a peripheral port John Deere, I've done the maths.

Cheers,

Benny "The Dong".

 

FYP brah ?

  • Haha 2
11 hours ago, BakemonoRicer said:

No PRP brace on this build, we have followed the laws of physics not marketing hype. 

 

Haha well to be fair, I'm not sure PRP were trying to market towards the 240kw SR's with those braces... 

Is this your car?

https://www.gumtree.com.au/s-ad/wahroonga/cars-vans-utes/2002-nissan-s15-200sx/1251512935

I guess I was wrong with the Samsonas and the power, but 506kW was close enough.

image.png.7955f677222e9705a65d51c5dbb47d5a.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...