Jump to content
SAU Community

Recommended Posts

I was in Sydney on the weekend and hadn't yet read this thread, long story short had a look at couple of private seller cars which I passed on.

While in town had some time to kill so got on trusty old google and found all of these Import dealers along Parramatta road... One even had "Sydney's Most Trusted and Respected Import Car Dealership!" plastered all over their website hahaha.

Sat in the R34 S1 on Sunday and the salesman went on to explain how its not one of the 200 built and that the previous owner had bought the car stock then when to Nismo in japan to have the goods fitted, to be honest looks like a nice car however I doubt very highly the validity of the Km's and the asking price seems ridiculous vs the quality of the car. The Interior was not from a "very well looked after" 47xxxKm car, steering wheel is covered in scratches, seat bolsters weren't worn through but they did seam a little age softened, the front bar lip has a crack in the drivers side plus the usual scrapes, the window and boot seals appear sun damaged, and the paint work seemed to have had a pretty poor cut and polish.

I am on expert by any stretch but after reading this and seeing what I have best to just keep squirrelling away money until the right one comes along, whilst collecting as much advice and knowledge possible along the way.

Have a chat with Aaron from Import Monster or Kristian from Iron Chef - you simply cannot go wrong with these blokes and they have the best rep in the community

  • Like 1

A phoenix job?

I'll ask now about new owners perhaps.

The brothers ET and JT seem to be trying to corner the market along P'matta Rd and beyond.

I'm led to believe that they own two businesses side by side - presenting themselves as being separate. Good ploy?

The f**k

Ed Lees - Phil Lee on MCM

f**k OFF

SNIP

MCM is such a joke of a show, I used to watch it, but it's so full of crap now it isn't entertaining. Both hosts annoy the shit out of me, and all they seem capable of doing is crappy bolt on mods, or taking cars to mechanics to get done up. That 'moog' bloke talks so much rubbish too. Errghh don't get me started..

Edited by colourclassic
  • 4 weeks later...

I actually went down last weekend to check out the Purple GTR. The car wasn't in the yard as according to Phil, it was down the panel beaters getting a touch up as he is a "perfectionist". He was quite persistent about me leaving a 100% refundable deposit, all subject to my viewing of the car. Of course, i am not an idiot and refused until i saw the car and did my own checks on it.

Lucky i did or i wouldn't have come across this thread! What an interesting read it has been so far. I have always been weary of Edward Lee's. Been watching his market for a few years and have always had my suspicions.

I paid for an ODO check on the car. Just received the report. It is currently in Japanese and will upload the translated version of it when i get it. But there is enough information there to prove his is happy to con people out of 49K!

post-19271-0-67652300-1377500361_thumb.jpg

Edited by SCRMER

$49K is a 'bargain'!

Regardless of how many 100s of Kms it's travelled, fatz could part it out for at least $50K :P

Lie straight in bed tonight Phil :P

Lol and people get Bent out of shape when I offer 30k for their genuine 40'000 km car

You know you have a shit heap when I don't offer anything for your bucket r34

Have a chat with Aaron from Import Monster or Kristian from Iron Chef - you simply cannot go wrong with these blokes and they have the best rep in the community

Yes, they can even scrutinise which "R" cars have had head-ons and suffered more than just cosmetic panel replacement.

Lol and people get Bent out of shape when I offer 30k for their genuine 40'000 km car

You know you have a shit heap when I don't offer anything for your bucket r34

This actually makes a strong point when you think about it :)
Exactly; which is why I kept my GT-R instead of trying to flog it off. I know it will have to go for cheap, already dropped too much money into it and don't want to go cheaper than $15k for it, even though it's not worth that much in the current market.
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...