Jump to content
SAU Community

Recommended Posts

Hey mate

I was thinking of both these items in general but never looked further into them as decided you have to draw the line somewhere

I ended up deciding just to run with standard gear until I have really had the time in the car at the track etc to know it back the front

THEN maybe look at doing either one and change nothing else and see what the results are and hopefully really only then know if the $$ were well spent

Oh yeah your motor makes me happy and sad at the same time

Hey mate

I was thinking of both these items in general but never looked further into them as decided you have to draw the line somewhere

I ended up deciding just to run with standard gear until I have really had the time in the car at the track etc to know it back the front

THEN maybe look at doing either one and change nothing else and see what the results are and hopefully really only then know if the $$ were well spent

Oh yeah your motor makes me happy and sad at the same time

Thanks Rob,

That is actually pretty wise input and will most likely do that now.

To conclude:

The nismo intake plennum would baiscally do f@#k all and would be a waste of $2k (although it looks nice)

The ACPT carbon tailshaft appears to have given a lot of grief / misery to some members (general feedback and what I have read on SAU) and better off not changing it until comes track time + I still have not had a reply from Torqline yet regarding their carbon tailshaft :wacko:

Anyways, as others have said I can focus a bit more on handling / suspension of the car instead.

That's ok mate, I'l be keen to see what your project / motor is like as well once your finished...I'm sure it will be fantastic ;)

Edited by Ants

awesome work, nice attention to detail

Thanks buddy. I'm very pedantic with everything I do (borderline obsessive compulsive disorder :woot: ) but I do enjoy seeing the results and if I can share it with other members that makes me even more happy :yes:

Edited by Ants

Put those funds towards a set of Racepace Motorsport Tein RAs (revalved to custom specs & Eibach springs that are softer & more suitable for GTRs) :)

Yeah, I will seen into that. I have been searching around for a good set of coilover suspension for the car, and there are so many choices. I want to pick the right one for me :P

Ok so, I know it seems like I have not done anything but that's not true.

Despite all this heavy rain I have been chipping away at restoring the car.

I know I said I would remove the rest of the rust later but I could not help myself :w00t:

So off I went to work on the front RHS arch and found this

IMG_1122_zps36511a3c.jpg

May not look like much to start of with but then....look a bit deeper

IMG_1123_zpsefaae9c6.jpg

Scrapped a bit more and rust galore

IMG_1125_zps7e894e16.jpg

More f@#king rust.....but where gonna fix it

IMG_1128_zps4f3852ee.jpg

Here you can see a better picture of where this nasty disease spread itself

IMG_1127_zps5abf7f6d.jpg

Again the mess

IMG_1136_zpsbf1fb137.jpg

Rust removed after some hard work with the power file (broke two belts this time)

IMG_1133_zpse907857c.jpg

The amount of sh!t I removed.

Next up

IMG_1141_zps3c79aca3.jpg

Clean it up with some prep wash - one side

IMG_1144_zps401a3441.jpg

The other side - there is a fracture in the metal so will fix that.

But first...

IMG_1147_zps3948b5ad.jpg

Lets treat it with some anti-rust paint like so

IMG_1146_zps8e1544b5.jpg

After I being filled and sanded and resprayed, I will put a coat of this motospray sound deadener to complete it but I have not got there yet. why you ask well your just gonna have to read on :yes:

IMG_1261_zpsc92aba3f.jpg

I have been waiting for while for to this arrive but it now finally here :banana:

The small box contained this....

IMG_1263_zps99511e8e.jpg

I think you guys know what it is....no its not an Tomei expreme dump pipe, its not an HPI dump pipe, its not an HKS dump pipe AND its not an X-force dump pipe

IMG_1269_zpsf8f01bf8.jpg

Its a brand new MINES SUPER OUTLET PRO II dump pipe which I am very excited to finally have in my possession :merli:

IMG_1265_zps227d48d1.jpg

Quality is superb!

IMG_1264_zps36b214ee.jpg

IMG_1270_zps5fe57f80.jpg

IMG_1267_zpsc6eb3c02.jpg

You can see where the dump pipe has been smoothed out and where the waste-gate pipe joins inside the dump pipe!

IMG_1268_zps0b43ab0c.jpg

Comes with the necessary accessories which is cool :thumbsup:

now for the next box

IMG_1271_zps23d38edc.jpg

Hmmmm....front pipes but what kind?

IMG_1273_zps29d00b5a.jpg

Yeah....midori seibi 80mm TITANIUM front pipes....I am almost in heaven :P

IMG_1274_zps77c51bf4.jpg

Just beautiful to look at

IMG_1275_zps19e64d72.jpg

Just another shot.

Now for some reason I have not received the other parts which well...compliment this but I can tell you this it's also TITANIUM :worship:

Edited by Ants

Very nice. Would the other parts happen to be the Midori Silent High Power NR titanium exhaust? :) I am trying to find info on pipe sizes for them at the moment!

I did actually look at Midori Silent High Power Ti exhaust system, but unfortunately I went another with another famous workshop for the exhaust....and no I'm not going to say who just yet until it is delivered ;)

Have to learn to be patient Michael :laugh:

Should arrive in the next day or so.

The Mines dump pipes actually do look similar to the Nismo dump pipes, although I have not seen one in the flesh to properly compare (nor a good photo of them) as they seem rather elusive since they have been discontinued (if anyone has a decent photo of them pm me)

What I can tell you is the Mines dump pipes have a Pipe diameter of 70φ.

Here are a few more photos of them

IMG_1276_zpsee1fe024.jpg

Comparison of mines dump pipes and CES dump pipes (CES dumps are for sale :yes: )

IMG_1283_zps853585b2.jpg

IMG_1279_zpsf8e7fb83.jpg

IMG_1280_zps729ac870.jpg

Yes, AP racing brakes look certainly look the part ;)

Starting to think i should get you to just double up on everything as a LOT of stuff you're getting is what i'm looking at lol

Yeah, I know. Like I said before you and I think alike :thumbsup:

I just undertook another major order today (one step closer to bankruptcy :pirate::teehee: ) with Perfect Run Japan (pm if you want to add something to the list for yourself)

Edited by Ants

What was the reason for goin the mines dumps when the HPI ones are 76mm dia ?

Well I wanted something different and special / unique at the same time. So it took quiet some time for me to decide to go with Mines dump pipes considering its costs :w00t:

I am not concerned about the 6mm size difference, as I was more interested in the design of the Mines dump pipe + I kind of have a thing for Mines :P and I am almost certain that it will deliver the goods considering my previous setup realised an increase of 60kw (297rwkw) with just N1 turbos + tomei step 1 cams and CES dump pipes @18psi (after tuning of course)

I am not chasing outright horsepower but rather a nice useable and responsive power band (approx. 380rwkw anything above that is a bonus but useless if I can't put it down on the road)

Edited by Ants

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...