Jump to content
SAU Community

Recommended Posts

Can we get a Motorsport build subsection, like what there used to be?

If it was strictly controlled and had only proper circuit and drag builds it would be beneficial for this section.

The bolt on turbos and paint job threads could stay where they are. Just use the section for the vast amount of quality Motorsport builds and developements that happen. The good Motorsport builds currently seem to be drowned out.

Just an idea for 2013......

Link to comment
https://www.sau.com.au/forums/topic/416552-motorsport-build-section/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

I am also for the idea of true motorsport builds being seperate to the normal build threads.

To make it simple do you have a criteria that the car has to have a cage in it to qualify for inclusion?

x 11ty!

Said and knew it was a bad decision to move the MS builds with street car builds. I for one VERY VERY seldom visit the build threads because as said already, MS builds seem to get lost amongst others..... Do the forum a favor and make some changes I reckon.

No need for more sub sections though IMO, just lump them in the MS forum and they'll survive on their own merit.

The sink or swim mentality marlin I like it :)

A sub section does make finding threads that were of Interest much easier down the track

I don't think a requirement like a roll cage is nessiary. Take each car on its merit. Most people in this section know if someone is building a car to actually use or if its just another turbo and r comps slapper.

There are high end street cars being built like bobby's R34 but they could stay where tey are

NS (cringe) have a collaboration thread for the Motorsport community but that looks impossible to keep up with.

Hi guys, this was discussed and agreed late last year, I will get it sorted in the next week or two. We will stick with a subsection but I'll post up details of how to subscribe to whole sections which may help.

So please start collecting threads to be moved into the Motorsport Builds section.

Also, I'm happy to hear any other ideas to get this place jumping again.

Hopefully we can breathe some life into this section for the new year :)

A win for the Motorsport section!

Results threads are good but usually just a repeat of the same people posting their results.

I reckon guys who are into this section like seeing what is happening to different cars and how things are done.

It'll be good to see all the builds that are relevant to this section in one common place again.

There needs to be a "Transfer" button from the normal build threads to the motorsport build threads as I have no doubt many guys have set out on a "street build" which very rapidly turns into a track only car. Is that an option down the track for the evolutions? Can they just contact a moderator to have it tansferred (obviously only if deemed worthy by the mod!)??

Why is that the more you spend on your car the less you drive it? Am I the only one thinking that? Even more so once the car becomes a fully track driven car i guess. Hopefully I don't find out....

Oh that thread! Yep understand. I started that thread to give people a place to post general stuff about their car that didn't necessarily want to start their own build thread. Its been a good thread if I may so and would probably be good for here as well to create some extra random discussion :)

However you have given me an idea to start a Motorsports build section for Motorsport focussed card on NS... not sure if it will work as their is a large build forum already. Will see how it goes.

Agree for this forum there should be a build section for dedicated track/motorsport cars.

BTW: the NS Motorsport section isn't cringe worthy :) theres actually some very knowledgeable guys on there with some very good and quick track cars :thumbsup:

Edited by SRS13

Yeah,

I would be very interested as well..

Just changed my username from tarmac Kermit...( based on I am starting with another shell and cage-thanks Brad/Brighty)

Finally have the car rolling now so its off to AFM( Phil) for the chassis work and paint... then start transferring the mechanicals..

cheers

chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...