Jump to content
SAU Community

Recommended Posts

Did you get another brake master or are you just going to run a standard one? Curious to hear how different it feels

Ah yes, I forgot to say!

I contacted Holford about the BMC and they were very quick to send out a new one! Great customer service!

However, the BMC did not arrive prior to me moving, so it was delivered to my old address and I have somebody coming to visit this weekend that will be bringing it with them so I haven't been able to fit the new one. I will see how things go this weekend at Wakefield Park and decide whether or not I should fit the new BMC prior to NSW Time Attack. If I feel like things are ok then I don't want to touch the car prior, but if it feels like it is an issue then I will definitely get on it!

Video from yesterdays NSCC Wakefield Park day

I was able to crack into the mid 1:09 second mark. I feel the car still had more in it though, I was still just getting used to the brakes. I also think the RS3's that are on it are starting to see their limits so will be taking 2 fresh sets to NSW Time Attack. Overheating issues are completely gone, I was doing full sessions worth of hot lots and the only thing letting me down was the tyres.

The video above was my first sub 1:10 for the day, I did a few more cleaner runs (too lazy to search through all my footage) where I began to stop using 2nd gear which seemed to clean my lines up a bit more. No pics at this stage but if I find some I will post a couple up.

  • Like 3

Aside from the re-wired walbro, is that the only change you've made to the fueling (fuel-tank end)? Don't experience any fuel surge when competing?

Great thread Tim.

Thanks mate.

Only fuel related mods are injectors and fuel pump with rewire.

I have only experienced fuel surge one when the fuel light had already been on for 2 laps at Wakefield, which surprises me to be honest.

Curious to hear what you thought of the brakes and what you have to get "used to"

I miss Wakefield...hell I miss track days :(

So far I'm impressed with the brakes. I just need to get used to the different pedal feel, I suspect the bigger brake master cylinder will stiffen up the pedal feel but I don't want to risk changing it and having problems at NSWTA.

  • 2 weeks later...

Well guys, NSW Time Attack is done and dusted. Pretty happy with how the car performed over the weekend, and managed to score myself a new PB of 1:09.0 :)

I will get some pics up later on but for now, here is the video of my fastest lap

  • Like 2

I was running Hankook RS3 265/35R18 on all four corners.

I quite like the tyres, they are noisier and go off quicker then an R comp, but for a street legal tyre they have a lot of grip and are very predictable when the do start to lose grip. I have found running them at 33-34psi (hot) in the Skyline is the best for me, and they appear to wear very evenly. I would definitely recommend them.

I had 2 fresh sets for the weekend (I had to drive over on 1 set - about 200kms)

I scrubbed in the second set doing some laps at the Speed Off The Streets day on the Friday.

After doing around 40 laps per set you can still see the little flame logos on both sets of tyres, so tread is not too worn.

  • 1 month later...

So things have been a bit quiet, to be honest the car sat on stands for like the last 3 weeks lol. I did an engine and diff oil change and the car sat there up until the weekend just gone.

I will be attending Nulon Nationals this Friday, as I have been invited by the Nulon team, though I'll still be cheering for the SAUNSW team ;) . If you're there, come say hi.

Things have been slow with the car because I've been recouping some funds spent in preparing the car for NSWTA and keeping quiet. I'm trying to plan ahead and decide whether this is the car I want to continue racing with, not that I have anything wrong with this, would just love to either really kick things up a notch power wise (I've done practically everything else that I wanted to now), or alternatively move on to a dedicated track car. I have made no real decision - only time will tell. The difficulty is, as always when selling modified cars, I know how much I'll lose out on if I sell this car lol.

Anyway, will post vids and/or pics after this weekend ^_^

What car do you think you would get if you changed to something else?

Honestly.... I don't know lol. Would love to get a GTR, but don't think I could justify the cost of modifying to my liking and tracking it. Realistically I think I just need to keep tracking this one and enjoy it for now lol.

^^ Provided you're not planning on winning championships, the 2wd R chassis has a number of things that make it a good fun thing to own and drive on track. And you do get to the point of not being prepared to cut losses once you've gone down the path of track modifications. I'd say keep driving it if it makes you grin each time after a run.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...