Jump to content
SAU Community

Recommended Posts

So initial word back from GCG is that the core needs to be replaced in the HKS, housing seems to be ok

We'll get a phone call sometime this week to go pick it up

In the mean time, we went a bit crazy on a recent order with HiOctane for the 34......

Cq4WU1m.jpg

So we have got:

Haltech ECU

Tomei Type-B Pon Cams

Tomei Cam Gears

Walbro in-tank fuel pump

850cc injectors and FPR

Upgrades gears for the oil pump

All this will go in after the track day in September, I want to get used to the new clutch first before putting more power in the car

We'll also be putting in a Gates timing belt and a new water pump while we are in there.

Also planing to get a Plazmaman plenum, throttle body and Billet fuel rail, paint the rocker covers and clean up the bay a bit

BRB while I start on my Mi Goreng diet lol

  • Like 3

I'm not too fussed on the wait for the extra power but my mates and mechanic have been pushing me to do the work now and not wait until after track day.

I could do it all now and it might be ready by track day (all depends on my tuner) but I will probably miss the 32 GTR 25th anniversary day cruise/lunch next month which I really want to take the 34 to

Having no boost for a month is a killer lol, it's an addiction. The longest I've gone without the car previously has been 2 weeks so this is a real test for me, it's like giving up smoking lol

I am interested in seeing how much power I will get out of her once everything is in and the HKS finally pushed its limits (only running at 50% at the moment)

Looks like a fun combination haha. My car should be ready in September too, maybe we should organise a cruise somewhere...

Nice, what are you getting done?

I'll be up for a cruise up until track day late September, need to rack up the k's on the new clutch, come October she'll most likely be off the road again for the work.

Nice, what are you getting done?

I'll be up for a cruise up until track day late September, need to rack up the k's on the new clutch, come October she'll most likely be off the road again for the work.

Same as yours but instead of cams I'm chucking on an SS2 turbo. Should be pretty quick once tuned. Hoping for 300 at the wheels

So initial word back from GCG is that the core needs to be replaced in the HKS, housing seems to be ok

We'll get a phone call sometime this week to go pick it up

In the mean time, we went a bit crazy on a recent order with HiOctane for the 34......

Cq4WU1m.jpg

So we have got:

Haltech ECU

Tomei Type-B Pon Cams

Tomei Cam Gears

Walbro in-tank fuel pump

850cc injectors and FPR

Upgrades gears for the oil pump

All this will go in after the track day in September, I want to get used to the new clutch first before putting more power in the car

We'll also be putting in a Gates timing belt and a new water pump while we are in there.

Also planing to get a Plazmaman plenum, throttle body and Billet fuel rail, paint the rocker covers and clean up the bay a bit

BRB while I start on my Mi Goreng diet lol

You only need the one cam gear man... And also why the upgrade for the oil pump? Mine has held up so far with the abuse...

Might look into head studs and cam springs if you want to run bigger boost, these can be done on the car without lifting the head :yes:

Organise your entry for the track day in September hahaha

I might do. It'll be pretty rubbish as it's on standard shocks though haha. Also I have no licence or helmet or gear or fire extinguisher. I might aim for the next one hahaha

I might do. It'll be pretty rubbish as it's on standard shocks though haha. Also I have no licence or helmet or gear or fire extinguisher. I might aim for the next one hahaha

I have spare helmet and extinguisher you can borrow

Licence is easy to get $50

I have spare helmet and extinguisher you can borrow

Licence is easy to get $50

This is about as tempting as a kebab after a big night on the piss. I'll see how the build and tune goes with Paul. Might just unplug the boost controller and run it as rich as a Saudi prince if it's too quick for the suspension

You only need the one cam gear man... And also why the upgrade for the oil pump? Mine has held up so far with the abuse...

If I'm going to upgrade 1 might as well do both.

I'd rather play it safe with the oil pump, minimize the chance of failure in the future

Might look into head studs and cam springs if you want to run bigger boost, these can be done on the car without lifting the head :yes:

Might be an idea. What's the limit on boost with stock studs and springs?

If I'm going to upgrade 1 might as well do both.

I'd rather play it safe with the oil pump, minimize the chance of failure in the future

Might be an idea. What's the limit on boost with stock studs and springs?

Stock studs held up OK when i was running 24psi but eventually i would have done a headgasket... I would say 20psi on stock springs and studs to be safe as long as you have a good tuner... Others might have different opinions?

Most engines start having issues once they have been messed with (in regards to bearings and bottom ends and stuff) best leave it the way it came from Nissan and thrash... I thought mine may have proven that to ya by now :P

  • Like 1

Stock studs held up OK when i was running 24psi but eventually i would have done a headgasket... I would say 20psi on stock springs and studs to be safe as long as you have a good tuner... Others might have different opinions?

Most engines start having issues once they have been messed with (in regards to bearings and bottom ends and stuff) best leave it the way it came from Nissan and thrash... I thought mine may have proven that to ya by now :P

Sounds good seeing as my MAP sensor will only let me run 21psi haha. I hope I land in a pit of money soon so I can come on the track day

If I'm going to upgrade 1 might as well do both.

I'd rather play it safe with the oil pump, minimize the chance of failure in the future

if you use the intake cam gear you are going to lose your VCT as its a single unit and cannot be mated to the adjustable cam because well thats sorta what VCT is!.

go take it back and get them $$ back!

if not you could always sell it to someone else and they can flip it around and use as an exh gear.

  • 2 weeks later...

The new clutch feels good, it will take a a little while to get used to it. Different friction point and it's a little heavier than my old one

Time to bed it in and get ready for track day next month :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...