Jump to content
SAU Community

Bomb Proofing Gtr Powertrain

saulogy
 Share

Recommended Posts

saulogy Explorer

saulogy

Posted
Posted

im building a custom car with a r33 GTR powertrain and a full built rb26 check out my other 2 threads to see what im building and spec. My question is how should i go about building a very strong drive line. Im planning on a exedy twin clutch, all axles and drive shaft are custom built buy driveshaft.com and can handle more power then ill ever have. the rear diff is a stock r32 gtr lsd ill have the LSD rebuilt. the front diff is stock and ill be puting in a LSD. Now the center diff how strong is it ? is there a up grade kit or something that im not aware of? and the transmission i heard that 3rd gear is weak so is there a trany upgrade kit to fix this or do i just have to bit the bullet and buy a race trans like OS Giken? I do have a great transmission builder so a up grade would be no problem. Ill just be smooth on the powertrain till its fully upgraded but i want to be able to run it hard on the track with slick mainly race track but some drag racing. any help or advice with this would be great and if there are some treads i have not read please sent me links Thanks

Link to comment
https://www.sau.com.au/forums/topic/428442-bomb-proofing-gtr-powertrain/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Am I missing something?

GTR's don't run a centre diff unless you're building a special transfer case using parts from some constant 4WD?

That's the thing... They don't, as you know. :D

Always helps to know the basic mechanics of the car you are building before you go asking for quotes.. I'm sure any workshop would be happy to charge for a 'centre diff' and the send you some metal in a box.

saulogy Explorer

saulogy

Posted
  • Author
Posted (edited)

That's the thing... They don't, as you know. :D

Always helps to know the basic mechanics of the car you are building before you go asking for quotes.. I'm sure any workshop would be happy to charge for a 'centre diff' and the send you some metal in a box.

WOW really.....ok fine a transfer case ,ATESSA just abbreviating

Edited by saulogy
33GTRV Mentor

33GTRV

Posted
Posted

Try this, google the difference between a centre diff and a transfer case. These guys know the car mate, it's clear your mechanical knowledge is a little way behind theirs. As for "bomb proofing" a gtr powertrain, put at least 40k aside. That's if you want to really do it properly. Lonefield billet cv's, billet driveshafts, carbon props hafts, hollinger sequential gearbox, quaife diffs front and rear, gts4 crown wheel and pinions, modified sump and front diff housing. Then you need to look at clutches, it gets out of control as while you make one thing stronger it creates another weak link in the chain.

There is GENUINELY bomb proofing as you say, then there is sensible strengthening of components

C4a0s Proficient

C4a0s

Posted
Posted

i want to be able to run it hard on the track with slick mainly race track but some drag racing. any help or advice with this would be great and if there are some treads i have not read please sent me links Thanks

if $$$ is not a problem sure knock yourself out but if $$$ is not infinite, then maybe u should plan on reasonable upgrades. Why pay for a part that can take 2000hp when u will only ever have 1000hp unless of course the price is the same then by all means.

u can make a car fast and reliable without spending exorbitant amounts of $$... :)

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

WOW really.....ok fine a  transfer case ,ATESSA     just abbreviating

Pretty big difference between a transfer case and a diff!

To do it on the cheap, properly, you're still looking at least 12k in diffs, clutch, transfer case, gearbox.

That's not taking into account axles, driveshaft or anything else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...