Jump to content
SAU Community

Bomb Proofing Gtr Powertrain

saulogy
 Share

Recommended Posts

saulogy Explorer

saulogy

Posted
Posted

im building a custom car with a r33 GTR powertrain and a full built rb26 check out my other 2 threads to see what im building and spec. My question is how should i go about building a very strong drive line. Im planning on a exedy twin clutch, all axles and drive shaft are custom built buy driveshaft.com and can handle more power then ill ever have. the rear diff is a stock r32 gtr lsd ill have the LSD rebuilt. the front diff is stock and ill be puting in a LSD. Now the center diff how strong is it ? is there a up grade kit or something that im not aware of? and the transmission i heard that 3rd gear is weak so is there a trany upgrade kit to fix this or do i just have to bit the bullet and buy a race trans like OS Giken? I do have a great transmission builder so a up grade would be no problem. Ill just be smooth on the powertrain till its fully upgraded but i want to be able to run it hard on the track with slick mainly race track but some drag racing. any help or advice with this would be great and if there are some treads i have not read please sent me links Thanks

Link to comment
https://www.sau.com.au/forums/topic/428442-bomb-proofing-gtr-powertrain/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Am I missing something?

GTR's don't run a centre diff unless you're building a special transfer case using parts from some constant 4WD?

That's the thing... They don't, as you know. :D

Always helps to know the basic mechanics of the car you are building before you go asking for quotes.. I'm sure any workshop would be happy to charge for a 'centre diff' and the send you some metal in a box.

saulogy Explorer

saulogy

Posted
  • Author
Posted (edited)

That's the thing... They don't, as you know. :D

Always helps to know the basic mechanics of the car you are building before you go asking for quotes.. I'm sure any workshop would be happy to charge for a 'centre diff' and the send you some metal in a box.

WOW really.....ok fine a transfer case ,ATESSA just abbreviating

Edited by saulogy
33GTRV Mentor

33GTRV

Posted
Posted

Try this, google the difference between a centre diff and a transfer case. These guys know the car mate, it's clear your mechanical knowledge is a little way behind theirs. As for "bomb proofing" a gtr powertrain, put at least 40k aside. That's if you want to really do it properly. Lonefield billet cv's, billet driveshafts, carbon props hafts, hollinger sequential gearbox, quaife diffs front and rear, gts4 crown wheel and pinions, modified sump and front diff housing. Then you need to look at clutches, it gets out of control as while you make one thing stronger it creates another weak link in the chain.

There is GENUINELY bomb proofing as you say, then there is sensible strengthening of components

C4a0s Proficient

C4a0s

Posted
Posted

i want to be able to run it hard on the track with slick mainly race track but some drag racing. any help or advice with this would be great and if there are some treads i have not read please sent me links Thanks

if $$$ is not a problem sure knock yourself out but if $$$ is not infinite, then maybe u should plan on reasonable upgrades. Why pay for a part that can take 2000hp when u will only ever have 1000hp unless of course the price is the same then by all means.

u can make a car fast and reliable without spending exorbitant amounts of $$... :)

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

WOW really.....ok fine a  transfer case ,ATESSA     just abbreviating

Pretty big difference between a transfer case and a diff!

To do it on the cheap, properly, you're still looking at least 12k in diffs, clutch, transfer case, gearbox.

That's not taking into account axles, driveshaft or anything else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...