Jump to content
SAU Community

Recommended Posts

Do FP do a bolt on for the RB26 based setups ? If so then that would be the way to go for sure but as far as I was aware only OD did a 68HTA bolt on, another reason I started this thread was to get this sort of info

I would expect a lot more then 20-30hp going from a 60mm GT wheels to the 68HTAs, granted it will spool slower but that's a trade off you have to have when going bigger wheels to make extra power :(

The 68HTA is probably not ideal for a 2.6 but 2.8 or like me a 3.0 they would be quiet nice, especially as a bolt on upgrade

OD buy their turbos from FP.. so from my understanding they are the same. And your right, the stroker engine can take the bigger wheels just fine. but on my RB26, its not ideal if i want to give any spool form my actual setup -5 ( i sometimes miss the response of the my gt-ss lol). I gotta look more into those 2 differents compressor wheels from turbo direct and kinuwaga. at 60mm, they could maybe match closely the performance of the gtx2860

Basicly both option I showed feature a 'drop-in'' billet wheel. Difference being one is from kinuwaga and one from turbodirect ( My gut feeling tells me I have more trust in turbodirect a direct dealer of garrett than a chinese knock-off)

kinugawa is actually Japanese, I've seen a lot of their 3582 wheels used in the xr6t turbochargers with some fantastic results.

You basically end up with a turbo that makes the power of an f6 turbo and responds like an xr6 turbo

Oh thanks, I will look into it. Turbodirect returned my PM and said it was 1250$us for the wheel fitted to a brand new gt2860. Not a bad considering the labour needed to fit the Kando wheels will most likely be around 200$ too.

Another option... Anyone heard of COMP turbos and their triplex ball bearing ? They ask 1200$ per turbo.

http://compturbo.com/products/turbos/ct2turbo/billet/ct2-4747

Here's their reply when asked for a gt2860 replacement :

Option 1
CT2 Billet 47/60 / Turbine wheel 53.90 choice of .64 or .86 Turbine housing
-Triple ceramic ball bearing
-15% More air flow due to billet
-fully rebuild able and upgradeable
--Lightweight turbine wheel
-1 year warranty
Price: 1199.00
Option 2
CT2 51/68 Turbine wheel 53.90 choice of .64 or .86 Turbine housing
-Triple ceramic ball bearing
-fully rebuild able and upgradeable
-Lightweight turbine wheel
-1 year warranty
Price: 1199.00

hank you for inquiry on our turbochargers. We do offer a Direct replacement for a GT2860 We offer it in both 360 Thrust bearing or our triplex ceramic ball bearing option.
Compressor wheel we offer both billet and cast.
All of our gt28 direct replacement are offered with lightweight turbine wheel to reduce turbo lag.

I have in my head they have a poor reliability record, though I could be wrong or that could be out of date info - look into it at least

Possible,, i found very little info about these.. at least, mounted on RBs.

I'm REALLY leaning toward the turbos direct billet upgrade.

On different setups, I ran the GTX2860's with the stock anti surge front housings with welded on flanges in my 2.8. In short they come on boost later than a 2860-5. They are quieter though.

I switched to 2860-5's with brass bearing cages made and fitted by me :)

I like the 'feeling' -5's better, but the GTX series has silicone nitride bearings (stops metal depositing and galling) and metal cages plus the billet wheel (that is great for running over 27psi...E85)

Apparently the 'racepace special' is pretty good, they get a 2860-9 turbo and fit a -5 exhaust housing for less restriction in the higher boost/rpm ranges without sacrificing too much down low.

Wish I had a chance to do this when I had my -9's...

On different setups, I ran the GTX2860's with the stock anti surge front housings with welded on flanges in my 2.8. In short they come on boost later than a 2860-5. They are quieter though.

I switched to 2860-5's with brass bearing cages made and fitted by me :)

I like the 'feeling' -5's better, but the GTX series has silicone nitride bearings (stops metal depositing and galling) and metal cages plus the billet wheel (that is great for running over 27psi...E85)

I'm suprised by this result sean. say, the response is the same but power top end slightly improved would make sens but the fact that the gtx was slower to spool. do you have a clue as to why is that ??

On a RB28, someone posted here his midrange improved by close to 100whp and spool was pretty much the same, if im not mistaken.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...