Jump to content
SAU Community

Recommended Posts

Take some spare undies when you next go for a full throttle run after you get the car back Pete. I'm sure you'll need them, just reading the graphs you can see how much of an animal this car has become just from those few changes.

You'll definitely be happy with the choices you made and now you will be able to enjoy the car shortly. Just be careful with all that power you now have.

  • Like 1

Fantastic results from the 6266

I have the same turbo on my built 2.6 and it made 450kw @ 25psi on e85 at Jez

Stroker engine is Realy spinning that turbine hard, love it !!

Can you post up your graph to compare.

It would be a great reference.

Interesting to note that the duration of these cams are only 260's. Just goes to show you don't need over grown grumpy wank wank things in there even on a large engine.

  • Like 1

Take some spare undies when you next go for a full throttle run after you get the car back Pete. I'm sure you'll need them, just reading the graphs you can see how much of an animal this car has become just from those few changes.

You'll definitely be happy with the choices you made and now you will be able to enjoy the car shortly. Just be careful with all that power you now have.

I am going on a diet so my adult diapers can handle it for a few days.

  • Like 1

Should sent a copy of that dyno to CRD... please explain your shitty tune??? but oh well.. good on ya pete.. glad you finally got the results and thats blood scary looking dyno result lol...

That JEZ... hmmm, one word "respect"... :thumbsup:

  • Like 1

HAHAHAHAHA WHAT THE HELL??????

That required capitals because that is a scary car.

Pete - dont be so quick to defend CRD "build" haha the engineer put the engine together the work shop did the rest and did a piss poor job.

Ran detontation and a leaky manifold etc etc - i would be asking for a refund on the tune at MINIMUM as its $1800 you could buy half a bigger turbo and run 500kw. You're too nice.

they risked the engine with a bad tune IMO. Its simple if it ran pre ignition for a second game over.

Edited by Stixbnr32

HAHAHAHAHA WHAT THE HELL??????

That required capitals because that is a scary car.

Pete - dont be so quick to defend CRD "build" haha the engineer put the engine together the work shop did the rest and did a piss poor job.

Ran detontation and a leaky manifold etc etc - i would be asking for a refund on the tune at MINIMUM as its $1800 you could buy half a bigger turbo and run 500kw. You're too nice.

they risked the engine with a bad tune IMO. Its simple if it ran pre ignition for a second game over.

That pre ignition is a killer

Well there were a few things I was not happy with but that was yesterday and I have moved on, so all good :)

Still smiling, that is were I am at today :cheers:

Cannot wait to pick it up and a 250 Klm trip home :yes:

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...