Jump to content
SAU Community

Recommended Posts

Have a VoIP Provider who cut off our ability to make International Calls from our office on the 23rd of August. I've been contacting them for 3 weeks to try and get this shiz resolved... keep getting told that the director of the company is going to call me back within 10 minutes etc... Nothing.... Multiply by over 40 phone calls (30 of which just ring out (To their Sales / Support / Accounting departments).

Getting real tired of this...

are you one of those people with a carry-on bag the size of Andre The Giant's torso?

I usually take a back-pack and a laptop case and combined theyre the smallest items on the plane (in overhead compartment).

well it a qantas approved roll on and if I'm flying other than economy and it iternational yes as I get my own locker.

if economy I have a soft bag that I can fit around others bags.

so from what your saying your the one breaking the rules as you can only have ONE carry on bag.....

As a silver member I reserve the right to take more carry on than you

I think

that's the one area status does not help, carry on limit same for all classes/status.

check in however.

using the Qantas first Class check in, you arrive at the door a bell hop with a luggage trolley picked up your luggage from your and wisks it away and no scales.

considering the luggage limit is over 100kg, they figure if you can carry it in your probally under the limit.

which reminds me better check the winter menu to see what wines are on the list for next week

http://www.ausbt.com.au/files/Qantas%20First%20Lounge%20Winter%202015%20breakfast%20menu.pdf

so from what your saying your the one breaking the rules as you can only have ONE carry on bag.....

this is true. but its handy because i can put them into different nooks and crannies left by other bags. Whilst others trawl the length of the plane looking for somewhere to fit their poker set briefcase.

on that note, i hate queues and often wait until the last minute to get on board. often a bad move, but not special enough to get priority boarding.

My last trip with Jet* they placed a bag scale at the queue with dedicated staff to weigh all carry-on.

Doesn't make things easier when you have to carry steel-cap boots & a work laptop

yeah and I think they dropped the kg as well at same time.

last time I traveled with them...1.5kg, was not travel for work, spare change of beach clothes and a tablet. (no lounge so was not worried about attire.)

I've had that.

in the Philippines when we went to Boracay it was a prop job.

they weigh every bag and every passenger to get the weight distrubution correct.

flight was half full and there were 2 gents and the front sitting side by side with the rest of the row empty

other dude went to move to the free seat and stewardess shouts at them to sit back.

last time I caught a prop job.

Nothing worst than someone taking up your side of the overhead storage!

Usually all the asian that line up at the front of the queue and bring in bags each ruining the storage system for the whole plane.

Just like people in cinemas who never sit in their allocated seat

I wish somebody could explain why they don't load the plane passengers from the back first like it makes no sense you can't get to ya seat cos the jerks are loading over head lockers in rows in front of you like wtf it's surely a smarter system?

/endrant

as the ppl at the front of the plane are more important.

or as per one of my biggest hates, those that are at the back start walking down and put their bag in the first gap filling the front rows.

most larger planes do call it buy block of rows for that exact reason, but that would require ppl to be at gate on time and to do what told, which seems impossible for most travellers.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...