Jump to content
SAU Community

Recommended Posts

21 hours ago, Kinkstaah said:

Actually I didn't have issues... then I HAD issues after taking my suspension to a very well known shop that isn't Centreline...

 

......so, looking for someone who actually knows Bilsteins.

What did you have them do to the Bilsteins? and what are the issues you are now experiencing?

"A workshop" (Not Centerline, as in actually NOT centreline)

I wrote my car off as most know.

Bought new car, cool
Moved perfectly working suspension from old car, to new car at aforementioned workshop. They weren't damaged or affected in the accident in any way.
Get car back, front is mysteriously low. Like, super not right.
Take them back, ask to adjust height this time and not have a 45mm rake which didn't exist on the previous car. Front was like 325mm center to guard, rear was like 365 center to guard.
Specified heights on old car was 355/345.

Anyway, was told the fronts were maxxed out.
Then was told they were "able to be fitted because dis-assembled/re-assembled" and heights are good now.
But they were fine before, in the same model of car.

After that, the fronts are crashy as, they will slam into bump stops over speed bumps, as though the shock has nearly no dampening at all... though the height is right.
Also knock, creak, etc.

Never really got a reason why this occurred. Just a lot of handwaving when pressed for any details.

Hence wanting to go elsewhere for a 2nd opinion on the shocks by someone who will know Bilsteins back to front. Was planning to go to Quadrant for this, but have had other car issues in the meantime :P
 

started trying to finish off the last few little (but time consuming) bits on the pulsar. When fitting new fuel lines in the tank and the shitty plastic hose fitting for the return line snaps off. it has completely sapped all motivation I have. $91 from Nissan to replace the section of the inner-tank swirl pot thingy.

If anyone wants to come to my house and complete the checklist I have for the car, I will pay monies. theyre not little jobs you can just get a workshop to do, they will laugh at you, then do a shit job, then charge through the ass and take a month to do it.

ok for real estate gurus.

 

lets say you own an apartment.

body corp finds a prob with the building and lets every-one know they are due for a XX,000 bill.

 

if you sell prior to them sending you the actual bill do you need to declare this to the new buyer?

 

could this bite you after settlement.

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...