Jump to content
SAU Community

Recommended Posts

Hi Hamish,

It is a self-shaming photo of a kerb I scraped one of my D1R rims on whilst attending a car meet; my blasé attitude testament to the virtues of owning cheap wheels. 

Needless to say my enthusiasm for navigating tight carparks has been well and truly curbed.

Hi Hamish,
It is a self-shaming photo of a kerb I scraped one of my D1R rims on whilst attending a car meet; my blasé attitude testament to the virtues of owning cheap wheels. 
Needless to say my enthusiasm for navigating tight carparks has been well and truly curbed.

I took the photo :)

You shat a brick thinking you took out your freshly sprayed sideskirt though

I used to pride myself on being able to take better care of my $1000 wheels than people do their $3000 wheels :(

Rest assured, I'll be taking better care of my GTR's wheels

I just assumed the general population were fkin awful at parking, particularly reverse parallel

Just irks me when I see someone selling $3500 LMGT4s or TEs off a $10k car with "slight rash" on "only 3 of the wheels", and practically the whole lip is missing. How the fk do they rash up the ones on the driver side?

Melbourne has the worst multi storey carpark I've ever seen

Hamish will know which one I'm taking about

It's about 8 stories high and can only fit about 18 cars on each level. Thing is a fkin go kart track. You just about have to do 3 point turns to turn up and down its steep ass ramps, with your head out the window to make sure you won't clash with concrete walls covered in other people's bumper paint.

  • Like 1

Yeah, my missus mazda 3 is sweet to zoom zoom around the multi level car parks too unlike my hearse of a car..

 

On 5/25/2017 at 10:23 AM, UNR33L said:

nice you found a new job? was it you in the IT field as well?  

Not exactly in the IT field but I do use a HP laptop with a docking into 2 screens if that counts as IT.
Gas and energy is where I'm at.

On 23/05/2017 at 3:04 PM, Birds said:

These kind of attacks have been commonplace in the Middle East for decades

Significant increase in Europe over the last 5-10 years

Imported people > imported problems

Whether pro-refugee people want to admit it or not, the problem simply would not exist in these locations if these countries didn't have such open border policies that allow the bad seeds to flow in with the goods

That religion is not compatible with western values

Hi

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...