Jump to content
SAU Community

Recommended Posts

Got any good maintenance hacks?

I've heard that using toothpaste on your headlights can be awesome at getting them shiny again.

Or, a rag around the head of a small screwdriver to clean in between cracks/seats etc.

A small foam painters brush can clean your vents.

Whatchoo got?

Link to comment
https://www.sau.com.au/forums/topic/460248-car-maintenance-hacks/
Share on other sites

Egg in radiator to block pin hole leaks.

Degreaser on rags can help remove stubborn stains on the paint work. Works great on the bumper.

Toothpaste to clean headlights works but its more expensive than buying a proper plastic lens cleanser. You don't need the kit.

Edited by SargeRX8

Want to drain the coolant out of your coolant overflow reservoir?

1. Remove hose on radiator side

2. Point away from the bodywork of the car and towards to ground, preferably into a container

3. Find the breather hole on the overflow reservoir.

4. Find a length of hose that fits snugly into the breather hole. The better the fit, the easier the next step

5. Blow into the hose, the air will force the coolant to start running out of the other end into you container on the ground and will continue to do so until it is pretty much entirely drained

6. Finish off your coolant replacement procedure.

7. Rip skids :D

I've heard that using toothpaste on your headlights can be awesome at getting them shiny again.

So what sort? Sensodyne to take away the aching headlight?? Or Colgate with flouride to stop any further decay? Actually we used to use toothpaste on the old Suzuki 'waterbottle' two strokes speedo and tacho cover because they always went yellow and faded, that was back in the '70's.

If your into metal polishing and you want to polish a pipe or your s/s muffler etc then an old woolen footy sock used with metal polish works great. You wrap is around the pipe and push/pull backwards and forwards.

The best thing for cleaning your dash facia surround [the part that feels like shark skin] is an old worn out face washer/flannel. One of the good qual older ones, they don't leave lint or wear out if used properly.

I also swear by Selleys All Clear for a flexible gluing agent for badges, side skirts and other such stuff.

Otherwise its cable ties and race tape!!!

  • Like 1

So what sort? Sensodyne to take away the aching headlight?? Or Colgate with flouride to stop any further decay? Actually we used to use toothpaste on the old Suzuki 'waterbottle' two strokes speedo and tacho cover because they always went yellow and faded, that was back in the '70's.

I can't answer that. How sensitive are your lights to hot and cold?

Want to drain the coolant out of your coolant overflow reservoir?

1. Remove hose on radiator side

2. Point away from the bodywork of the car and towards to ground, preferably into a container

3. Find the breather hole on the overflow reservoir.

4. Find a length of hose that fits snugly into the breather hole. The better the fit, the easier the next step

5. Blow into the hose, the air will force the coolant to start running out of the other end into you container on the ground and will continue to do so until it is pretty much entirely drained

6. Finish off your coolant replacement procedure.

7. Rip skids :D

Not the same, but last time I changed coolant. I opened drain screw on radiator and with a tridon radiator cap with pressure release slightly open, cap still on. It sucked the entire coolant system dry through the drain screw, reservoir and all. Never had this happen before.

Superfine steel wool "0000"

Do all your external glass. Comes up crystal clear and gets everything off.

Then use rainex - wax on, wax off :D

It's also used to do French polishing on wood between coats so trust me when I say it does NOT scratch glass.

I wouldn't use it on all my cars if it did.

  • Like 3
  • 1 month later...

Here's an easy one, buy a $2 funnel from Super Cheap and cut the nozzle off just above the threaded section, it will now screw into Skyline and other Nissan oil fill ports.

Thats awesome!

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey everyone. Is there a way I can get the original window sticker (maroney label) for my 1995 R33 GTST? I doubt I’ll be able to ever get it but it’s worth a shot to ask
    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
×
×
  • Create New...