Jump to content
SAU Community

Recommended Posts

Have you tried searching? just in case somebody has done this before and already put all the info on the internet somewhere. long shot, but you might get lucky.

but you can basically just get any turbo you want and bolt it straight on, the engine/ecu will compensate and make magic happen!

I had a 25de Neo in my old 33 and I turbod it on my green p's. All I did was source out all the stock parts so, side mount inter cooler, stock 25 turbo, as much of the stock piping as I could get and that was it. I already had the det ecu but you will need that aswell. In total I think everything cost me $300 but I also paid a mechanic friend to install it because I didn't want the hassle of tapping holes for the oil lines etc

Sell your car, buy a turbo car spend money and time (that was saved for the turbo conversion on the N/A) and make the turbo car faster.

Adding a stock RB25DET turbo to a RB25DE Skyline to be still slower than a stock Golf GTi, heck even a Golf GTD is not worth the effort, time, money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...