Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
On 20/12/2016 at 2:24 PM, Kinkstaah said:

I stupidly suggested to my gf that a MX5 would be a perfect car for her to get a head start in, learn on, use, etc. 

Now I want one, with a small turbo albeit.

LS Swapped FD would be great, but if you want a ~1250-1350kg car with an easy to use 250-270kw then you start looking into options like, oh I dunno, a RX7.. or a jap turbo import made by Nissan...

I have this discussion with my housemate who got an E36 328i with plans to put a LS1 in.

I got bored the other day so did some quick power-to-weight calculations:

Given that the 4door is about 1430kg dry with a manual box (according to 'sources' aka the internets) my current power-to-weight is roughly 192rwkw per tonne.

To get to the same in an MX5 you'd need:

  • NA series – 180rwkw
  • NB – 204rwkw
  • NC – 213rwkw

So naturally aspirated is pretty much out the window. Given the size of the donk you'll probably need forgies too = $$.

For comparison, in an S13 you'd need 235rwkw, which should be reasonably easy with a sorted SR20DET?

So perhaps OP already has the perfect track car? :)

Obviously power-to-weight is just part of the equation, but still...

Actually the MX5 engines (at least the 1.8) is known to hold a good 200rwkw, there's plenty of people out there with a turbo, some guy has gone full John Richardson at 191 rwkw and has done something like 60 track days on it. Seems about 180rwkw in a MX5 is similar to the "300 is safe" kw in a RB25.

And then you go to a corner or brake and instantly lose 400KG of weight.

But no, the S13 with a modest power setup and sorted handling is a very good option as well. You only really get problems in any car if you decide HOLY SHIT POWAAAAAAR or decide you want slicks and then you get oil control fun. I mean shit the S13 gets blame for being a bad chassis, but someone won WTAC with one. Not a very stock one albeit, but it can't be that bad for fun and games!

  • Like 1

I think the mx5 guy your talking about with 191rwkw also had an Na one with 90 something rwkw and was still very very competitive. Turbo did 1.22 -23 around sandown and the Na did 1.25-26 from memory. The performance came from weight reduction. Anything that could be removed was and everything else lightened. Think fibre glass panels, carbon roof, carbon drivers seat etc. Very impressive what those little things can do but just like anything $ need to be spent. Skylines and Silvias are still great track cars and can be made very quick without mega $ spending. Think, richos r33. That is 1 quick machine that cost a modest amount focusing on the things that needed to be done. He could make that thing substantially quicker with bulk $ put into it.

  • Like 1
22 hours ago, Kinkstaah said:

Actually the MX5 engines (at least the 1.8) is known to hold a good 200rwkw, there's plenty of people out there with a turbo, some guy has gone full John Richardson at 191 rwkw and has done something like 60 track days on it. Seems about 180rwkw in a MX5 is similar to the "300 is safe" kw in a RB25.

And then you go to a corner or brake and instantly lose 400KG of weight.
...

Fair enough :)

21 hours ago, admS15 said:

I think the mx5 guy your talking about with 191rwkw also had an Na one with 90 something rwkw and was still very very competitive. Turbo did 1.22 -23 around sandown and the Na did 1.25-26 from memory. The performance came from weight reduction. Anything that could be removed was and everything else lightened. Think fibre glass panels, carbon roof, carbon drivers seat etc. Very impressive what those little things can do but just like anything $ need to be spent. Skylines and Silvias are still great track cars and can be made very quick without mega $ spending. Think, richos r33. That is 1 quick machine that cost a modest amount focusing on the things that needed to be done. He could make that thing substantially quicker with bulk $ put into it.

Very good points Bill. Those N/A times are insane, must be a great driver and a very well sorted car. It must be so much easier on all parts carrying that much less weight around, which should help with reliability.

So I think my ideal track car then is a fully sorted 200rwkw turbo MX5 NA pre-1992 in club plates so you can drive to/from events. For $10k please :) 

Very good points Bill. Those N/A times are insane, must be a great driver and a very well sorted car. It must be so much easier on all parts carrying that much less weight around, which should help with reliability.
So I think my ideal track car then is a fully sorted 200rwkw turbo MX5 NA pre-1992 in club plates so you can drive to/from events. For $10k please [emoji4] 

10k order 1 for me too please[emoji106]
  • Like 1

Thoughts on this MX5?

http://www.my105.com/ListingDetails/p/1/k/mx5/id/17404

 

I like the idea of swapping for something a little easier to manage and cheaper to run. LS1 with an RX7 also sounds interesting. Does it drop straight in?

Is Sports Sedans the only place you can run something with an engine swap?

In a CAMS sense, improved production allows an engine swap for same manufacturer/same number of cylinders. but yes you'd need sports sedans for a nissan 4 cylinder in an mx5.

Thoughts on this MX5?
http://www.my105.com/ListingDetails/p/1/k/mx5/id/17404
 
I like the idea of swapping for something a little easier to manage and cheaper to run. LS1 with an RX7 also sounds interesting. Does it drop straight in?
Is Sports Sedans the only place you can run something with an engine swap?

I reckon it's awesome but would be pretty tough to engineer for rego I'm guessing
  • 2 weeks later...

I reckon it's awesome but would be pretty tough to engineer for rego I'm guessing


LOL I was actually looking at it for myself apologies! No need for engineering as it would be a track car only.

I've been giving this some serious thought as the GTR is in a pretty good state to sell as literally everything has been refreshed on it, and the 32 market is on the up.

I was actually fairly close to securing a trade on an SR3 but it fell through. But I did do quite a bit of research on them and liked what I found. Much as Ben noted with the Radical, all parts are 'lifed' and replacing anything costs a fortune. So can't break anything which rules out door to door racing, however running it as a track car is definitely affordable. Also you can source a used hayabusa engine and chuck that in for a fraction of the cost of a sealed engine.

The other cars that interest me are ICV's. Only thing that concerns me is safety. Rollover protection looks suss and hitting a wall at 200kmh in a metal coffin welded together by a bloke in a shed doesn't exactly inspire confidence. Does anyone know more about them?

Also, mx5's are rad. My first car was an NC it is still one of the best cars I've ever driven. Needs a snail though
  • Like 1

Oh wow someone's combined a (turbo) MX-5 and an open wheeler: http://jalopnik.com/driving-a-stripped-down-turbo-miata-kit-car-doors-are-1791238438

You basically move your NA/NB running gear over to a tube chassis and lose about 1/3 weight in the process. Looks like heaps fun.

The Exocet kits start at $7k US, which is actually pretty good. No idea whether something like this could be engineered in Aus. Great idea nonetheless!

sgfr6hvvob7gytxnk2ns.jpg

 

4 hours ago, V28VX37 said:

 

Oh wow someone's combined a (turbo) MX-5 and an open wheeler

 

There is a link on page 1 of this thread to an Exocet....

Edited by GeeDog
  • Like 1

My knee jerk intrawebs review of the Exocet is it's rubbish but perhaps it reminds me of dickheads in Clubmans who apparently think it's cool to try to take your apex, next time I'm turning in track rat.

Serious? Would need mudguards wouldn't it? That could be a problem, nothing to hang them off.

  • Like 1

FYI looks like the Exocet distributor in Aus has gone under and ripped a few people off by the sounds of it. 

Would make for an interesting track car, wonder if it could run against the clubbies in supersprints 

  • 2 weeks later...

We've run a Stohr WF1 for a few years-- by far the fastest car per dollar you can drive.  54's - 56's at Wakefield, 1:25's to 1:27's at EC.  Some of the numbers earlier in thread ($3k per day?) are seriously off the money.  The car has a GSXR1000 engine which you can buy for about $3k complete.  Race prep is relatively cheap, the thing is somewhat simple really, most of the tech is in the aero.

  • Like 3
13 hours ago, LSX-438 said:

Some of the numbers earlier in thread ($3k per day?) are seriously off the money.

Sports Racer Series (per event)

$1,900 = New Tyres

$500 = Mechanic / Pit crew

$100 = fuel

$1,895 = Event entry fee

Total = $4,395

 

Radical Australia Cup (per event)

$1,900 = New Tyres

$500 = Mechanic / Pit crew

$100 = fuel

$3,975 = Event entry fee

Total = $6,475

 

Now of course, if you just want to do club trackdays or super sprints that total per event comes down to around $500

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
×
×
  • Create New...