Jump to content
SAU Community

Recommended Posts

1 hour ago, MBS206 said:

When you say full hard on the rear and soft on the front, what do you mean exactly?

Spring stiffness? Or shock bound / rebound?

My Pedders Extreme suspension only has dampening settings, but the spring rates are excellent for the street, for the dampening settings on the street I currently have them set at 8 clicks from full soft on each end (there is 30 clicks between full soft and full hard), works well for rough Sydney roads

When I got them I started playing around from full soft, and kept clicking over a few weeks of driving to get the compliance I was after 

On full soft, if I hit a bump/pothole it would hit the bump stops, on 8 clicks from soft it glides over bumps like a Limo which is what I want for the street

  • Like 1

Shit box now ready, took it to Ian at Porter's Suspension. He knows his Nissan shit boxes very well.

Front we could only get -3.3° after I raised it but that's more than enough for my amateur level of racing.

Rear Ian suggested -1.5° is plenty, based on the tyre contact, said it's not even reaching the edges yet so there's no need to run too much as I'll have traction issues.

Measured up the car, and my broscience and bromeasurements were pretty good. Driver side is about 3mm higher than the passenger side. Slight positive rake as well.

Ian did mention it's rare you actually have people raising their cars for handling because everyone thinks slammed cars handle better but they don't. He said everything the way it is is great.

Ended up with about 7° castor, and 3mm total toe out up front and 2mm toe in at the rear.

Let's see if my rubbish driving can get the lap times down to the  1m50-55s bracket on street tyres.

PXL_20230707_000837133.jpg

PXL_20230707_010455492.jpg

  • Like 9
3 minutes ago, Dose Pipe Sutututu said:

Shit box now ready, took it to Ian at Porter's Suspension. He knows his Nissan shit boxes very well.

Front we could only get -3.3° after I raised it but that's more than enough for my amateur level of racing.

Rear Ian suggested -1.5° is plenty, based on the tyre contact, said it's not even reaching the edges yet so there's no need to run too much as I'll have traction issues.

Measured up the car, and my broscience and bromeasurements were pretty good. Driver side is about 3mm higher than the passenger side. Slight positive rake as well.

Ian did mention it's rare you actually have people raising their cars for handling because everyone thinks slammed cars handle better but they don't. He said everything the way it is is great.

Ended up with about 7° castor, and 3mm total toe out up front and 2mm toe in at the rear.

Let's see if my rubbish driving can get the lap times down to the  1m50-55s bracket on street tyres.

PXL_20230707_000837133.jpg

PXL_20230707_010455492.jpg

Heard a lot of good feedback about that shop

33 minutes ago, Jasoncauser said:

Heard a lot of good feedback about that shop

Yeah he's good, I just tell him what I'm using the car for and he recommends me things and I just say yes.

  • Like 2

Broscience works, what tyres you on again?

Also add mk4 supra to swap list. People are starting to get them dialled up here with coilovers, tyres and brake pads they are quick.  
 

16 minutes ago, robbo_rb180 said:

what tyres you on again?

Just Hankook RS-4 street tyres, I want to really feel the limits of the car and suspension before I put on better tyres.

Of course I also need to improve my driving. Being of Asian decent, my DNA has been programmed to drive Toyota Camrys, so trying to steer a stern drive is always a challenge lol.

  • Haha 3
1 hour ago, The Bogan said:

Politically incorrect, but funny, well..... . .

https://youtu.be/GvWXvw5HHDI

I can't believe how inappropriate TV was back then 😂

  • Like 1

To be fair, Drawn Together was extremely and deliberately inappropriate even for its time, worth a watch if you can find it. Wikipedia says 2004 which makes it younger than SAU

Getting ready to take out the shit box to SMSP, filled up 3x jerry cans and car has E20 or so in it at the moment.

Also noticed last time I was out there, during All Jap Day (useless day to try attempt PBs on the timed sessions, too many numpties in your race line) I tried to take T8 in 2nd and blazed the tyres, also because the throttle was a bit too sensitive so I've dumbed down the pedal to TB table. Should help make the TB less sensitive when I'm trying to negotiate a turn.

image.thumb.png.3c8fa8cb76ee50c0b8206fb24f6332e8.png

3 minutes ago, Duncan said:

Just go faster and use 3rd 😛

lol... or that!

Tonight I would say is my proper 3rd time out there, the last time I went out was with All Jap Day and both sessions didn't have a good crack at it. 

Then when the track was clear and I was doing a good hot lap they ended the session early!!!!!!! 

 

  • Like 2

Stiffer front springs did the trick, went 5s quicker and not to mention the track temps were quite low.

PXL_20230711_093409016.thumb.jpg.508f3f310c11fff26ac2d56919e2ba0d.jpg

PXL_20230711_081607716.thumb.jpg.e63086c352ce7b9a0f449a1b173eeb42.jpg

PXL_20230711_100045234.thumb.jpg.aa185af8918c60ec4bbfbdb36666a13a.jpg

 

Had to retire the car early too, destroyed the rear pads. Had about 30 to 40% at the start of the night and by the end of 3rd session, it was down to the backing plate 😂

PXL_20230711_102431806.thumb.jpg.b864c83a5eef6412a56e21c7c72b6fda.jpg

 

  • Like 11

And in car footage of the shit box, I believe I should be able to get it down into the flat 1m50s with more practice with these street tyres.

My lines are still a bit shit and I'm wasting a bit too much time coasting about finding the grip limits.

Once I can totally master the Hankook RS-4, I might move to a faster tyre like a Yokohama Advan A052.

 

  • Like 7
On 12/07/2023 at 3:12 PM, Dose Pipe Sutututu said:

 

My lines are still a bit shit and I'm wasting a bit too much time coasting about finding the grip limits.

 

I get lectured all the time about this, one of my mates is a good steerer and a data boffin. He's always going on about 'zero time' and how I can't have the throttle shut and no brake input either. I've never driven SMSP but it looks like all the quick guys really test 'track limits'.

17 hours ago, Komdotkom said:

I get lectured all the time about this, one of my mates is a good steerer and a data boffin. He's always going on about 'zero time' and how I can't have the throttle shut and no brake input either. I've never driven SMSP but it looks like all the quick guys really test 'track limits'.

He's not wrong, because that time could be spent going faster! :D 

SMSP is a fun track, it's also very scary. You always have the fear of binning the car with next to no run off!

Here's a lap with my mate driving the shit box, he hasn't driven it in about 5 years (since Wakefield days - had better tyres then, less power, however was lower and had softer springs).

 

 

  • Like 3
7 hours ago, Dose Pipe Sutututu said:

You always have the fear of binning the car with next to no run off!

Are we watching the same video? You may not like Sandown or Broadford in Vic, that's for sure :D

8 hours ago, Dose Pipe Sutututu said:

Here's a lap with my mate driving the shit box, he hasn't driven it in about 5 years (since Wakefield days - had better tyres then, less power, however was lower and had softer springs).

Can you overlay his/your data with the Garmin to see where you are losing time?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...