Jump to content
SAU Community

Recommended Posts

Custom exhaust system. Any good?

Hey guys, 

So i've heard that going custom could be a better option than buying an invidia, or x force exhaust system. I want a loud and aggressive system, and i'm struggling to decide whether to get a custom exhaust made or buy a cat back system. I don't want to be paying a ridiculous price for just a basic muffler delete, which i personally aren't a fan of :7_sweat_smile:. Any suggestions? 

Link to comment
https://www.sau.com.au/forums/topic/470327-custom-exhaust-system-any-good/
Share on other sites

So you have heard that getting a custom exhaust done is better than buying a brand name exhaust who have tested hundreds of different configurations and done hundreds of hours of R&D on their systems? Reeeeeeeeeeeealy?

There is a good reason people go brand name and cough up the big bucks. Lack of unbearable drone is one very, very good reason.

  • Like 1

A custom exhaust is just as good as the person who designs and makes it. Most Japanese off the shelf exhausts have a restrictor that reduces a 3in system to 2 1/2 in so I avoid them. For best results post up your city at least and maybe somebody will recommend a good fabricator. You don't say what kind of car you have but a cat back exhaust means that you are still restricted by the current size of your front pipe.

You don't say why you want a new exhaust - the purpose will have a bearing on what you should get.

If you want to squeeze out as much horsepower as you possibly can, then it's an Akrapovic exhaust system you need.

If you just want a nice note without it sounding obnoxious, like I do, the one for my taste was the Megan Racing muffler.

If you want to be an obnoxious wanker, get a custom exhaust with tail pipes that you can house an illegal immigrant family in.

  • Like 2
29 minutes ago, anthonymcgrath said:

Mines downpipe
Hks "silent" power
Decat

Then go do a tunnel run

Your welcome

How did you go about sourcing the HKS system? Can i speak to some aus companies and see if they can organise it all if the system is from america?

Ah I'm sorry I just seen that it's for the vq model whereas I was on about the rb engines lol. However I would say a decat is the key and decent exhaust and itll roar.. perhaps a butterfly in the decat that can be opened and closed so essentially you can make it straight through or tone it down for residential areas.

So jealous of you lot over in that side of the world heh! Would love to get my family and me out there!

On 5/7/2017 at 6:58 PM, R377 said:

What sort of horsepower gains did you guys get from exhaust upgrade for v36 skylines ?

I can't find the post but a user call Yo-Yo claimed big gains when he did his exhaust upgrade,

The post is years old

  • Like 1

You will definitely get gains, but on an N/A car, it won't be crazy amounts. A tune would get you more even if you keep everything as stock. My V36 has a custom system. FI HFC to 2.5" mild steel to a magnaflow xpipe and 2.5" all the way to HKS Legamax mufflers. Sounds good, no drone, but I doubt it made more than 5hp lol.

Edited by colin.ssc
  • Like 1
  • 2 years later...

Ok folks a question or 2 on the similarity between the exhaust on the 370Z and the v36? I thought I read some where that the 370z was 200mm shorter so is there any other differences?  I was looking at the Empire 370z cat delete pipes.

 

 

On 2/12/2020 at 4:30 PM, 370 GTS said:

Ok folks a question or 2 on the similarity between the exhaust on the 370Z and the v36? I thought I read some where that the 370z was 200mm shorter so is there any other differences?  I was looking at the Empire 370z cat delete pipes.

Not sure, but I assume they would fit considering Z1 motorsports make one-size-fits-all test pipes for the vq37.

 

 

10 hours ago, GTSBoy said:

As if they would have different length cats.

 

13 hours ago, pauliev36 said:

Not sure, but I assume they would fit considering Z1 motorsports make one-size-fits-all test pipes for the vq37.

 

 

Thanks.

13 hours ago, pauliev36 said:

Not sure, but I assume they would fit considering Z1 motorsports make one-size-fits-all test pipes for the vq37.

 

 

 

10 hours ago, GTSBoy said:

As if they would have different length cats.

Sorry I was talking about the whole system, as I believe the Z is shorter over all than the V36.

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...