Jump to content
SAU Community

Recommended Posts

9 hours ago, r32-25t said:

I assume this is a gtst or gtt, if so just buy a turbo and fit it don't bother trying to make hybrids as they don't work 

Rb26dett gtt r34. Sorry for my bad eng. My rebuilted turbos 2510 worked well for 3 yeas, quick spool 3000 1kg, max boost 1.8. but unfortunately in them something was horrible and damaged the wheels. Then I decided rebuild they and to increase the rear end of the turbine to 2530. But 2530 is a very old turbine and I decided to look at the catalog garrett to  search of a new turbine and came across a GTX2863. I want to take the chra (cartridge) of GTX2863 and put it in the hks body while increasing the rear of the turbine and compressor housing. but on the calculator comes out a very lagly so it is. or it is better to stop at 2530. There where do the turbines said that after boring the rear and the front hull hks differ from GTX and will not be. They said that it would give an exact copy of the turbine GTX2863. In Russia, this is the only company that manufactures qualitatively turbines on a double-saw saddle-bearing.

Then spool up original twin gtx2863 on rb26?

1.jpg

11.jpg

111.jpg

1111.jpg

Edited by frakzz
2 hours ago, ActionDan said:

*cough* current M3 and M4 are twin turbo...

But... a bigger motor and proper variable cams.

Things a GTR should have had in the 34 :(

Hrms.. you may be right for that lol 

On 23.09.2017 at 10:09 AM, Dose Pipe Sutututu said:

Every "experiment" with larger GTX wheels ends up with anti climatic results.

If you want to burn money correctly I suggest you go a big twin scroll turbo and be happy. Every owner who wants response, driveability and big power all end up moving to a modern single. If it took BMW only 3 years to work out twins are gay it's sure taking a damn while for you GT-R boys.

I will take the risk

rebuld my hks GT2510 to GTX2860R

2 hours ago, r32-25t said:

Voodoo did his and they were a disaster and sold them for a lot less then it cost him in the first place 

his change only compressor wheel to 2863, i  change all enternals (CHRA) 

he did not increase the back, it turned out that there is a bottleneck

he changed only the compressor wheel, and I changed all the insides and grind the turbine house (replace to GTXCHRA 2860)

2860 wheel less than 2863

 

 HKS GT2510

COMPRESSOR:
-Wheel- 63 Trim - 47.7 Inducer / 60.1 Major -Housing- 60 Inlet / 50 Outlet - 0.60 A/R
TURBINE:
-Wheel- 62 Trim - 53.0 Major / 41.7 Exducer -Housing- GT25 inlet / Internal GT25 oulet - 0.64 A/R


GTX2860R

Compressor Wheel: 45.7 / 60 mm / Trim 58 (GTX 11+0 Blade billet Wheel / Extend tapered tip)
Turbine Wheel: 47.0 mm / 53.8 mm / Trim 76

Edited by frakzz
9 hours ago, frakzz said:

his change only compressor wheel to 2863, i  change all enternals (CHRA) 

he did not increase the back, it turned out that there is a bottleneck

he changed only the compressor wheel, and I changed all the insides and grind the turbine house (replace to GTXCHRA 2860)

2860 wheel less than 2863

 

 HKS GT2510

COMPRESSOR:
-Wheel- 63 Trim - 47.7 Inducer / 60.1 Major -Housing- 60 Inlet / 50 Outlet - 0.60 A/R
TURBINE:
-Wheel- 62 Trim - 53.0 Major / 41.7 Exducer -Housing- GT25 inlet / Internal GT25 oulet - 0.64 A/R


GTX2860R

Compressor Wheel: 45.7 / 60 mm / Trim 58 (GTX 11+0 Blade billet Wheel / Extend tapered tip)
Turbine Wheel: 47.0 mm / 53.8 mm / Trim 76

That's cute mate.

How do you plan on making the smaller inducer of the GTX wheel fill the larger hole left by the GT wheel?

Do yourself a favour and forget about shoehorning this and that into places where they don't belong. If you REALLY want to run GTX 2860's then do it properly and run the genuine GTX housings and redo the pipework to suit (IE 3.0 inch all the way to the compressor covers) and do away with the small, tight Nissan gear. 

5 hours ago, Piggaz said:

That's cute mate.

How do you plan on making the smaller inducer of the GTX wheel fill the larger hole left by the GT wheel?

Do yourself a favour and forget about shoehorning this and that into places where they don't belong. If you REALLY want to run GTX 2860's then do it properly and run the genuine GTX housings and redo the pipework to suit (IE 3.0 inch all the way to the compressor covers) and do away with the small, tight Nissan gear.

See the result next week after setting aem

1.jpg

2.jpg

Edited by frakzz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...