Jump to content
SAU Community

Recommended Posts

Me and the Minister of War and Finances went for a early morning cruise, all was going well till I gave it some juice when I hit a  overtaking lane, a car going from 50 to 70 in a 90 zone.

As the 86 overtook the plodder, she said, "what have you done to the car and why does it make whooshy noises".

The gig was up, so I told her that yeap, I had some work done on the exhaust side and a tune.

Pretty sure she was confused with my response, but, not wanting to sound like she didn't know what I was talking about she closed her eyes and went back to snoozing.

Winner winner chicken dinner. 

  • Haha 3

Automotive therapy parts arrived.

Gearbox mount and support bushings.

Why? The OEM bushings have the consistency of marshmallows, this makes the shifter feel so much tighter, tight like a tiger even....plus cheap, and parts were sent to work so they are also my dirty little secret.

NVH may increase slightly, but I did simular with the STI and it wasn't a issue.

20191008_103819.thumb.jpg.1c977afce15a0cf63ac50654a38b67a2.jpg

On 10/4/2019 at 9:39 AM, Dose Pipe Sutututu said:

Go with @PLYNX this wekeend is mental for me :(

Tomorrow cake delivery (missus side hustle), then accountant, then planning out our bathroom reno with the builder, then buy shit, then going to Hans Zimmer symphony (because all Skyline owners are sophisticated LOLOLOL)

I didn't go ! ( eyes still twitching ! ! )

I'm planning a Snowy Mountains run around Xmas/new year.

And by plan I mean basically follow this > https://www.ytravelblog.com/things-see-snowy-mountain-drive/

It's pretty that time of the years.

Fitted the bushings.

Didn't really notice any difference in feel as yet.

Maybe when I'm doing some skids the added stiffness in the bushings will show an improvement.

There was an additional small amount of NVH from the Whiteline bushing insert, but not enough to worry me.

Meh, at least they were cheap.

  • 2 weeks later...

As it's a common fact that I'm an idiot, and a consumer, so, in fact, I'm a idiot consumer, I purchased an Arc catback I saw on the gumtrees.

New cost $1800ish (import monster), I paid some older gent $720 for it,  it's hardly used so if it is too obnoxious it won't be hard to flip.

Job for tomorrow arvo I believe.

20191022_150530.thumb.jpg.87e3f0bd159bef1ccb09f0d0eb990dc0.jpg

  • Like 1
  • Haha 1

Cold start actually sounds quiter.

But way more bass, shit in the garage rattles.

 

Once cold start is over its nice and deep with zero drone.

Sounds really good when I'm wringing its neck.

 

Happy days.

11 minutes ago, Dose Pipe Sutututu said:

Lol... so when's the 2JZ going in?

When you give me $60k to give to someone to do it for me.

That should get me a new powertrain and drivetrain, installed and tuned (properly).

Could I just go LS instead????

https://www.whichcar.com.au/features/6-litre-ls-swapped-toyota-86-street-car

With you paying and all, I thought it would be polite to ask....

Lololol, I can't even pay for my own future M3/4/5 (not picky) how can I pay for your 2JZ swap?

Although if I had to pay for your V8, would be a Ford Coyote motor, none of this push rod aids.

  • Haha 1
On 24/10/2019 at 8:02 AM, PLYNX said:

No its gotta be Toyota with Toyota !

There for: 1GZ-FE QUAD TURBO

image.thumb.png.8e02ce00ba7436b0df668690a93559e0.png

I was going to say it's got to be Subaru, because my Toyota is a Subaru.

Stupid boxer engines, it's either glass pistons or chalk rods.

 

  • 2 weeks later...

It has been rattling around loose in the boot for ages.

 

As long as I don't try and drive on the roof of a tunnel1601215189_images(1).jpeg.f049b489de4f694f7390c9fea093cc2a.jpeg I should be fine.

#BECAUSENOTRACECAR 

 

20191108_160213.thumb.jpg.d11123b15153dc75c42773c1ebc71bd0.jpg20191108_160159.thumb.jpg.392ab0b23a650d6f3e26ce266b142478.jpg

25 minutes ago, GTofuS-T said:

may as well ditch it, in the boot it's just dead weight!

Nah, I've used them on a few cars, but never my own, it only takes a few seconds to get into the boot.

Plus trying to find enough space inside the small cab is a problem, well, it is a issue with a 1.5kg with a hose.

No room in either footwell if you still want to sit in the car and not kick it all the time, nowhere in the rear, plus the rear would take longer to get it than the boot.

Cars tend to burn slowly to start with, from my experience with burning cars anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...